Insights into the Vibration Characteristics of Spatial Radial Gate Affected by Fluid–Structure Interaction

Abstract

Radial gate, a spatial frame structure, is the key factor to control water discharge in dam structure and storm surge barriers. However, the fluid-induced vibration (FIV) problem always occurs owing to fluctuation loads exerted on the gate, threatening the safety of hydropower stations. In this work, two fluid–structure interaction (FSI) modal analysis methods—the coupled acoustics–structure method and the added-mass method—are provided. Further, a comprehensive investigation on the vibration characteristics of the spatial radial gate, considering spatial structural characteristics and the FSI effect, is conducted. The numerical results revealed that the feasibility of the proposed coupled acoustics–structure method in analyzing FSI modal analysis was demonstrated; moreover, a reasonable length of the fluid domain in front of the skinplate existed for efficient computation. Meanwhile, through the added-mass method, the rational added-mass discount factor of hydrodynamic loads obtained from the Westergaard formula was provided. The FSI effect induced whole-gate rotation vibration streamwise around trunnion pins, significantly reducing the gate’s fundamental vibration frequency. In addition, three typical dynamic-instability vibration patterns of radial gates were presented. These patterns were affected by spatial structural characteristics and FSI. It was demonstrated that the struts and skinplate coupled bending–torsional vibration would cause the radial gate frame structure to fail catastrophically. The proposed insights can provide guidelines of vibration characteristics analysis of the radial gate submerged in flow water in reservoir and storm surge barriers.