Integrated Bluetooth and multi-band ultra-wideband antenna

A Novel Compact Planar Triple-Band Monopole Antenna for Wlan/Wimax Applications

“…The structure of the proposed antenna is much simpler than those presented in [1][2][3][4][5][6][7][8][9][10][11][12]. Also, this antenna exhibits higher gain than the one proposed in [3]. A prototype antenna is fabricated and measured, and the measurement agrees well with the simulation, which shows the merits of better performance of interference suppression and compact size of 24 × 36 mm 2 .…”

“…So, a triple-band antenna is required. Many multi-band antennas [1][2][3][4][5][6][7][8][9][10][11][12][13][14][15] and ultra-wideband (UWB) antennas [16] have been proposed. In [1], the antenna consists of three "ears" type strips, and three bands can be created by the three "ears".…”

“…In [2], a reconfigurable antenna is realized by using many open-stubs intersecting with each other. By properly etching an SRR slot on the radiating element of an UWB antenna, two notched bands are achieved in [3]. A coplanar waveguide (CPW)-fed planar antenna with an inverted-L strip, a split-ring slot, and a Y-shaped slot is proposed in [4].…”

“…Three bands covering 2.3-2.75, 3.38-3.7, and 4.91-6.28 GHz are obtained, which cover the 2.5/3.5/5.5 GHz WiMAX and 2.4/5.2/5.8 GHz WLAN bands. The structure of the proposed antenna is much simpler than those presented in [1][2][3][4][5][6][7][8][9][10][11][12]. Also, this antenna exhibits higher gain than the one proposed in [3].…”

Design of a vehicle mounted low profile broadband half‐bandwidth loop antenna for RCIED jamming

“…Single broadband antennas are also being researched. [7][8][9][10][11][12][13][14][15] However, such antennas cannot cover the entirety of radio frequency bands, or they cannot be practically applied to jamming systems due to their physical dimensions. To overcome such disadvantages, a vehicle mounted low profile broadband antenna with good mobility that can cover the radio frequency band is necessary.…”