Integrated monitoring of Encoder status parameters and GUI based Remote Control Panel using LabVIEW

Abstract

This paper describes the necessity of "Integrated Monitoring of Encoder status parameters and GUI based Remote Control Panel using LabVIEW" application, which is the implementation of serial and Ethernet data transmission using LabVIEW. Remote Control Panel (RCP) is an electronic instrument from which specified commands can be given to Encoders. The RCP is generally connected to the command Encoders through serial links (RS 232, RS 422). After getting the commands from RCP, the commands are generated at Encoders and are transmitted followed by different processing. In the hardware based RCP system, some faults are observed at RCP and the facility to monitor the Encoders status parameters at RCP is not present. To overcome these bottlenecks, a Personal Computer (PC) based integrated RCP system was visualized and developed based on LabVIEW. LabVIEW was used for better GUI interface and reduction of development time. This system takes Encoder status parameters from Encoder change over unit through Ethernet link and is serially connected to the Encoders to gives commands to it. Hence all the status parameters of Encoders are monitored as well as appropriate commands can be given to the Encoders through this application.

Industrial Process Management Using LabVIEW

“…User operates the instrument through the friendly graphical interface, thus completing the measurement signal acquisition, analysis, judgment, display, and data access. The paper adds the value towards the low cost, less manufacturing time, ease of implementation with reliable measuring, controlling and data logging demands of industry [4].…”

Global industrial process monitoring using raspberry pi controller

“…But there is need of robust and easy computerized system involves high implementation costs, there is need of alternative solution in terms of equal robustness and cost effective. l [2].…”

“…As computerized system involves high implementation costs, there is need of alternative solution in terms of equal robustness and cost effective. stem for process card sized single used as front end a servers used to hat connects all me systems TCP, bedded web server ective with high is sufficient for control [2]. A printed circuit board (PCB) uses conductive tracks, pads and other features etched from copper sheets to connect the ctronic components laminated onto a non-conductive mount technology (SMT) is a technique…”