Integrated Numerical Simulations and Experimental Measurements for the Sintering Process of Injection-Molded Ti-6Al-4V Alloy

Abstract

Metal injection molding (MIM) is an advanced manufacturing technology that enables the mass production of high-performance and complex materials, such as the Ti-6Al-4V alloy. The determination of the size change and deformation of the Ti-6Al-4V alloy after the sintering process is challenging and critical for quality control. The numerical simulation could be a fast and cost-effective way to predict size change and deformation, given the large degrees of freedom for the sintering process. Herein, a finite element method based on the thermal-elastic-viscoplastic macroscopic model is developed to predict the shrinkage, deformation, relative density, and crack of injection-molded Ti-6Al-4V after sintering, using the Simufact software. Excellent agreements between experimental measurements and numerical simulations of the size and deformation are demonstrated (within a 3% error), confirming the accuracy of the numerical model. This approach can serve as a guideline for the mold design and sintering optimization of the MIM process.

Design of Refractory Alloys for Desired Thermal Conductivity via AI-Assisted In-Silico Microstructure Realization

“…Others may involve dimensional reduction due to high-dimensional representations [ 17 ], which should be carefully investigated to avoid severe information loss and reduce structural variability. Overall, the physical descriptor-based method is the most convenient and capable category for material design [ 18 ]. Dealing with massive data, ML approaches were employed to learn the intricate relationship between microstructure characteristics and their homogenized responses.…”

Evaluation of the Corrosion Resistance of Watch Links from 316L and 904L Austenitic Stainless Steels Obtained by the Metal Injection Molding (MIM) Technique Intended to Be in Contact with Human Skin

“…The main controlled molding parameters are as follows: the material temperature, the mold temperature, the injection pressure and the speed [5]. The material temperature modifies the feedstock viscosity, which decreases as the temperature increases.…”

Advances in Sheet Metal Forming Processes of Lightweight Alloys

“…Su et al [5] developed an FE method based on the thermal-elastic-viscoplastic macroscopic model to predict the shrinkage, deformation, relative density, and crack of injectionmolded Ti-6Al-4V after sintering, using commercially available Simufact software. In the authors' research, experiments were simultaneously performed to justify the accuracy of the sintering model and simulation method.…”