Intelligent Measurement of Void Fractions in Homogeneous Regime of Two Phase Flows Independent of the Liquid Phase Density Changes

Abstract

Determining the amount of void fraction of multiphase flows in pipelines of the oil, chemical and petrochemical industries is one of the most important challenges. Performance of capacitance based two phase flow meters highly depends on the fluid properties. Fluctuation of the liquid phase properties such as density, due to temperature and pressure changes, would cause massive errors in determination of the void fraction. A common approach to fix this problem is periodic recalibration of the system, which is a tedious task. The aim of this study is proposing a method based on artificial intelligence (AI), which offers the advantage of intelligent measuring of the void fraction regardless of the liquid phase changes without the need for recalibration. To train AI, a data set for different liquid phases is required. Although it is possible to obtain the required data from experiments, it is time-consuming and also incorporates its own specific safety laboratory consideration, particularly working with flammable liquids such as gasoline, oil and gasoil. So, COMSOL Multiphysics software was used to model a homogenous regime of two-phase flow with five different liquid phases and void fractions. To validate the simulation geometry, initially an experimental setup including a concave sensor to measure the capacitance by LCR meter for the case that water used as the liquid phase, was established. After validation of the simulated geometry for concave sensor, a ring sensor was also simulated to investigate the best sensor type. It was found that the concave type has a better sensitivity. Therefore, the concave type was used to measure the capacitance for different liquid phases and void fractions inside the pipe. Finally, simulated data were used to train a Multi-Layer Perceptron (MLP) neural network model in MATLAB software. The trained MLP model was able to predict the void fraction independent of the liquid phase density changes with a Mean Absolute Error (MAE) of 1.74.

An Experimental and Simulation Study for Comparison of the Sensitivity of Different Non-Destructive Capacitive Sensors in a Stratified Two-Phase Flow Regime

“…A large and growing body of literature has investigated the use of AI in several industries [28][29][30][31]. Therefore, the use of AI can be a good alternative to be used for gaining more information from capacitance-based sensors [32].…”

Measuring volume fractions of a three-phase flow without separation utilizing an approach based on artificial intelligence and capacitive sensors

“…It is to be noted that, except for the volume fractions of 0% and 100%, for other values, the measurement of each of the regimes presented in Fig 1 , using different sensors leads to achieving different capacities, this figure in designed by SketchUp software. COMSOL software has been subjected to benchmarking through experimental experiments in the authors’ previous works [ 38 ]. In the mentioned reference, a pipe was made of PLA using a 3-D printer.…”

Dynamic Fractional-Order Grey Prediction Model with GWO and MLP for Forecasting Overseas Talent Mobility in China

“…The MLP is a widely utilized feedforward artificial neural network [54]. The structure of a three-layer MLP comprises an input layer, a hidden layer, and an output layer.…”