Intelligent Reflecting Surfaces With Spatial Modulation: An Electromagnetic Perspective

Abstract

Electromagnetic wave control using the concept of a reflecting surface is first studied as a near-field and a far-field problem. Using a secondary source present in a wireless communication environment, such as a backscatter tag, it is possible to leverage the incoming radiation from the source as a reference-wave to synthesize the desired wavefront across the reflecting surface, radiating a field of interest. In this geometry, the phase grating, which is synthesized using an array of sub-wavelength unit cells, is calculated by interacting the incident reference-wave and the desired wavefront, similar to a hologram. When illuminated by the reference-wave, the reflected wavefront from the calculated phase grating is guaranteed to constructively add in the direction of the desired radiation (beam-steering in the far-field) and also focus at the intended depth (beam-focusing in the radiative near-field). Next, leveraging a dynamic modulation mechanism in the context of an intelligent reflective surface (IRS) illuminated by a backscatter tag, we demonstrate that one can selectively focus and defocus at an arbitrarily positioned receiver within the 3D field of view of the reflecting surface. This enables the control of the amplitude of the radiated electric field at the receiver location, paving the way for a spatial modulation mechanism by means of reconfiguring the reflecting surface in a backscattered wireless communication environment. In addition to the phase modification approach on a unit cell level to reconfigure the aperture radiated wavefronts, we finally present a time varying IRS concept making use of a time-delay based approach relying on a delay adjustment between the reflection coefficients of the IRS' unit cell lattices.

Intelligent Reflecting Surfaces at Terahertz Bands: Channel Modeling and Analysis

“…Let λ denote the carrier wavelength. Henceforth, we consider L x = L y = λ/2 andd x =d y = 0 [8], [11]. The Tx and Rx are located in (D t , θ t , φ t ) and (D r , θ r , φ r ), respectively, and hence their position vectors in Cartesian coordinates are p t = (D t cos φ t sin θ t , D t sin φ t sin θ t , D t cos θ t ),…”

Large Intelligent Surface-Assisted Nonorthogonal Multiple Access for 6G Networks: Performance Analysis

“…This can be realized by incorporating reflective elements (REs) which manipulate the impinging electromagnetic waves to perform various functionalities, such as wave reflection, refraction, absorption, steering, focusing and polarization [12]. In light of this, extensive research efforts have been made towards characterizing the unique properties of LISs, in addition to proposing enhancing schemes and investigating their performance in different scenarios, e.g., [13]- [20].…”

Millimeter-wave multi-mode circular antenna array for uni-cast multi-cast and OAM communication

“…The development of wireless multimedia communication techniques over the last years requires the design of new, high-directive 1 , compact 2 , reconfigurable 3 , multiple-input–multiple-output (MIMO) 4 and meta-surface antenna systems 5 . At the same time, due to congestion in the radio frequency spectrum below 10 GHz, the fifth generation of wireless communication (5G) is now exploring the best possible options at the millimeter-wave (mmWave) spectrum.…”