Intra-pellet neutron flux distribution measurements in LWR critical lattices

Abstract

We have developed inexpensive and easy-handling measurement methods on intra-pellet neutron flux. A foil activation method with metallic foils, which were fabricated by punching out technique and etching technique to reduce fabrication error and positioning error, was used for the intra-pellet neutron flux distribution measurement. The developed method was applied to measure intra-pellet neutron flux distributions in a reduced-moderation light water reactor (LWR) lattices, and uncertainty of the distributions was estimated to be 1% to 2%. Measured values were analyzed with a continuous energy Monte Carlo code.Comparison of measurements and analyses revealed that the developed method is useful for the validation of an advanced fuel design method considering neutron behavior in fuel pellets.

Azimuthal flux distribution measurements around fuel rods in reduced-moderation LWR lattices

“…The measurement error mainly consists of fabrication error, positioning error and statistical error (Yoshioka et al, 2013). A metallic foil was manually cut with a box cutter.…”

“…"Micro reactor physics", proposed by Takeda, focuses on the neutron characteristics in fuel pellets such as the neutron flux distributions and spacedependent neutron energy spectra (Takeda, 1999;Takeda et al, 1991Takeda et al, , 1996Takeda et al, , 2003. Intra-pellet flux distribution measurements were conducted to validate the "micro reactor physics" approach (Yoshioka et al, 2013).…”