Investigation of different alcoholic modifiers for the separation and determination of two isomers of dinitrotoluene (2,4 and 2,6) by ion mobility spectrometry

Abstract

Some alcoholic modifier gases were applied to separate isomer peaks in ion mobility spectrometry (IMS). Different mechanisms have been investigated on the separation, such as collision cross-section and analyte-modifier cluster formation. In this regard, some parameters that affected the cluster formation, such as dipole moment, electron affinity, the position of functional groups, and the modifier structure, were evaluated. On the other hand, some effective experimental parameters, including cell temperature and the flow rates of the drift and modifier gases, were also optimized.The combination of dispersive liquid-liquid microextraction with thin-film evaporation (DLLME-TFE) was used as a sample preparation method for the extraction of 2,4-dinitrotoluene (2,4-DNT) and 2,6-dinitrotoluene (2,6-DNT) isomers (as the target analytes). Isobutanol was selected as the alcoholic modifier to separate the ion molecular peaks of these isomers. The limit of detection and the limit of quantification obtained were 15 and 50 μg L À1 , and the linear dynamic range (50-700 μg L À1 ) with coefficient of determination of 0.9941 and 0.9914 were obtained for 2,4-DNT and 2,6-DNT, respectively. The intra-and inter-day relative standard deviations were obtained between 3% and 5%. For validation of the method, determination of the isomers was accomplished for a red wastewater field sample, resulting in relative recovery values of about 96%.