Investigation of Etp Facilities and the Industrial Effluents Quality: A Case Study in Noakhali Industrial Area, Bangladesh

Abstract

Untreated wastewater disposal from industries has been a crucial environmental issue for developing countries like Bangladesh. The current study aims to investigate the status of Effluent Treatment Plant (ETP) and the quality of effluents in the Noakhali industrial area, Bangladesh. Total 10 industries were surveyed and the ETP status showed that about 30% of industries do not have ETP facilities and only 30% of industries use their ETP for the treatment of the effluents where the rest of the industry’s ETPs were under construction or exit but not used. Effluent samples were collected from seven locations near the discharge points of various industries. All the physicochemical parameters were determined using standard analytical procedures and analyzed the values comparing with the guideline standard by the Department of Environment (DoE), Bangladesh. The average values of electric conductivity (EC) have exceeded the tolerable limit in maximum effluent samples. On the contrary, the temperature, pH, and total dissolved solids (TDS) values were within the standard limit for all of the collected effluent samples. The chloride concentration of the three effluent samples surpassed the limit. The biological oxygen demand (BOD) and chemical oxygen demand (COD) limit were exceeded for the effluent sampling sites S-6 and S-7 collected near the food and beverage industry. Besides, the maximum dissolved oxygen (DO) values of the effluents were below the standard which indicates poor water quality. Environmental nuisance is producing in Noakhali industrial area as maximum industries have not enough wastewater treatment facilities. Present study demonstrated that it is obvious to operate the ETP regularly for improving the quality of effluents to save our native environment from the harmful effects of wastewater.