Investigation of experimental results and D-optimal design of hafnium ion extraction from aqueous system using emulsion liquid membrane technique

Abstract

Hafnium metal is used in a wide range of industries such as microprocessor manufacturing, nuclear reactors and special alloys due to its physical, chemical and radiation properties. Emulsion liquid membrane (ELM) is an effective and efficient alternative for heavy metal separation compared to conventional methods due to high selectivity, energy-saving, high mass transfer and low operating capital. In this study, Cyanex 572 as a carrier, Span 85 as a surfactant, hydrochloric acid as an internal phase and kerosene as a diluent were used. In the first part of the study, the stability of the emulsions was investigated. The most stable emulsions were obtained by adding PIB polymer (3% w/v), Span 85 surfactant (3% w/v) and stirring for 15 min. In the second part, the separation of hafnium metal ions from aqueous solutions was investigated using ELM technique. The highest separation was obtained at 4% (v/v) as carrier concentration, 4% (w/v) as surfactant concentration, the membrane-to-feed volume ratio of 20/100 and W/O/W emulsion stirring rate and time equal to 400 rpm and 5 min, respectively. Moreover, to optimize the factors influencing the tests, the design of experiment (DOE) was performed using D-optimal method via Design Expert 10 software. Based on DOE results, the maximum extraction (> 99%) was achieved when the carrier concentration, the surfactant concentration, W/O/W emulsion stirring time, W/O/W emulsion stirring rate and emulsion volume/feed phase ratio were 4.49% v/v, 3.90% w/v, 11.49 min, 310.54 rpm and 2:1, respectively.

Recent advances in synthesis and applications of mixed matrix membranes

“…Reverse osmosis, electrodialysis, ion exchange, chemical deposition, liquid-liquid extraction, emulsion liquid membrane, etc. are common techniques for removing heavy metals from sewage [30][31][32][33]. High energy consumption, high processing and operating costs, large production of liquid waste, and toxic sludge have created a significant challenge in using conventional methods [34].…”

Machine learning-powered estimation of malachite green photocatalytic degradation with NML-BiFeO3 composites

“…Water pollution, the introduction of harmful substances into water bodies like rivers, lakes, and oceans, stems from industrial processes, agriculture, urban runoff, and sewage disposal 1 – 12 . This pollution jeopardizes human health, ecosystems, economic activities, and access to clean drinking water 13 , 14 .…”

Impact of SiO2 doping on the structure and oil–water separation properties of a PVDF membrane: insights from molecular dynamics simulation

“…Among these, membrane separation technology has garnered considerable attention due to its advantages of low energy consumption, simple operation, strong selectivity, environmental friendliness, and high separation accuracy. 7 Polymer membranes, notably polyvinylidene uoride (PVDF), [8][9][10] polyether sulfone (PES) [11][12][13] and polypropylene (PP) [14][15][16] are widely utilized in practical applications.…”