Investigation of Gas-Liquid Mass Transfer in the Fuel Scrubbing Inerting Process Using Mixed Inert Gas

Abstract

This study investigates the dynamics of mass transfer between gas and liquid during the fuel scrubbing inerting process, utilizing a mixed inert gas (MIG) composed of CO2, N2, and trace amounts of O2. The goal is to lower oxygen concentrations in aircraft fuel tanks, thereby reducing the risk of explosions. The experiments were conducted on a fuel scrubbing inerting platform, where an MIG was utilized to deoxygenate aviation fuel. Changes in the oxygen concentration in the ullage (OCU) and the dissolved oxygen concentration in the fuel (DOCF) were measured during the scrubbing process. Validated by these experimental data, Computational Fluid Dynamics (CFD) simulations demonstrated the reliability of the model. The discrepancies between CFD predictions and experimental measurements were 4.11% for OCU and 5.23% for DOCF. The influence of the MIG bubble diameter, MIG flow rate, and fuel loading rate on DOCF, gas holdup (GH), and the oxygen volumetric mass transfer coefficient (OVMTC) was comprehensively examined. The results reveal that larger MIG bubble diameters lead to an increased DOCF but reduced GH and OVMTC. In contrast, a higher MIG flow rate decreases DOCF while boosting GH and OVMTC. Additionally, a greater fuel loading rate increases DOCF but decreases GH and OVMTC. These findings offer important insights for optimizing fuel scrubbing inerting systems, underscoring the necessity of selecting suitable operating parameters to enhance oxygen displacement and ensure aircraft safety.