Investigation of Heat and Moisture Transport in Bananas during Microwave Heating Process

Abstract

The numerical method was used to investigate heat and moisture transport during dehydration of bananas from microwave heating. COMSOL multi-physics software was employed to perform the simulation task. A banana is defined as a porous medium. It has constituents of water, vapor, air as the liquid phase and a solid porous matrix. The numerical results of this study were validated with experimental data. The profiles of moisture, vapor and pressure are discussed in this study. Moreover, the effects of the ripening stages of the banana are examined. A higher heat flux was observed from the beginning period along with the increasing time steps until 50 s. Heat generation decreased during 50 s to 60 s, coinciding with a small rise in temperature, but the temperature gradient remained constant. The temperature distribution of both unripe and ripe banana samples was non-uniform. At the center of the banana, the temperature increased rapidly and reached its highest temperature with the negative temperature gradient toward the boundary surface. More heat generation was observed around the center region of the banana. This was due to higher moisture in comparison with the boundary surface. Heat and moisture were transported from the center of the banana to its surface. The water convective flux peaked around 11 mm from the center. The vapor pressure peaked at the center for all cases. Less heat generation within unripe bananas was observed due to the lower moisture content.

Microwave Drying Characteristics and Drying Quality Analysis of Corn in China

“…At present, the techniques commonly used for drying grain include hot-air drying, freeze drying, and microwave drying [3][4][5]. Of these techniques, microwave drying only works on polar molecules and is very popular due to its advantages, such as fast drying speed, lower energy consumption, and ease of control [6][7][8][9][10]. Hemis et al [11,12] studied microwave drying of wheat, soybean and canola seeds, and established a new coupling model.…”

Optimization of Microwave Coupled Hot Air Drying for Chinese Yam Using Response Surface Methodology

“…These disadvantages not only affect the color, flavor, texture, taste, and nutrients of dried materials but also reduce the density and water absorbance ability of dried products and the shift of solutes from the interior to the surface [12]. Compared to hot air drying, microwave drying technology is another method that has been widely used to dry various vegetables and fruits because of its high energy efficiency and high drying rate [13,14]. It is applicable for the drying of fruit and vegetable products especially with high moisture content (e.g., grape, carrot, and apple).…”

“…The interior heat generated by "molecular friction" within the materials leads to water evaporation and subsequently creates a pressure environment with the pressure decreasing from the interior of drying materials to the surface. Thus, the pressure gradient can greatly speed up the drying process, shorten drying period, and improve energy efficiency [13,15]. Nevertheless, microwave drying is well known to cause non-uniform heating.…”

Mechanistic and Machine Learning Modeling of Microwave Heating Process in Domestic Ovens: A Review

“…In addition to thermal profiles, in models that simulate the heating process of foods with high moisture or in small volume size, where the mass transfer can make a great difference to the final results, the moisture change due to the microwave power should also be validated. The total moisture loss [ 3 , 46 , 49 , 50 , 67 , 72 , 73 ] and/or transient point moisture content [ 74 ] have been measured for validation. Besides, the pressure generated due to moisture evaporation was also measured for validation [ 46 ].…”