Investigation of open hole area effects on the air dynamic pressure, Froude number, and hydraulics of distillation trays using CFD

Roshdi, Sepideh; Kasiri, Norollah; Ivakpour, Javad; Hashemabadi, Seyed Hassan

doi:10.1007/s11696-022-02623-0

Cited by 2 publications

(1 citation statement)

References 31 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…The effects of the free area ratio to the efficiency of commercial-scale sieve trays with CFD simulations are studied by Roshdi et al The results of their investigation showed that it is possible to determine the geometrical modification effects on entrainment and efficiency [23].…”

Section: Introductionmentioning

confidence: 99%

CFD Investigation of Dry Tray Pressure Drop of Perforated Trays without Downcomer

Kállai

Mizsey

Szepesi

2023

Period. Polytech. Chem. Eng.

View full text Add to dashboard Cite

The dry tray pressure drop behaviors in trays without downcomer with different inclination of holes (standard, 75°, 60° and 45°) and tray thickness (2.5, 5, and 10 mm) are investigated. The trays are investigated using computational fluid dynamics (CFD) in Ansys Fluent® software. 20 °C air was used to represent the gas phase with 20–50 m3/h flow rates. The column there are four trays with 7 mm of hole diameter.The CFD results determined that the higher angle of the holes with respect to the tray causes smaller dry tray pressure drop and turbulence intensity in the gas flow. Furthermore, in 75° hole inclined perforated tray and the standard hole the dry tray pressure drop is similar. From the simulation results it is also determined that in case of higher tray thickness the dry tray pressure drop is lower.On the basis of the CFD simulation results some correlations can be determined for the calculation of the dry tray pressure drop of the different trays.

show abstract

Section: Introductionmentioning

confidence: 99%