Investigation of the effects of geometrical parameters, eccentricity and perforated fins on natural convection heat transfer in a finned horizontal annulus using three dimensional lattice Boltzmann flux solver

Abstract

Purpose The purpose of this paper is to investigate the effects of geometrical parameters, eccentricity and perforated fins on natural convection heat transfer in a finned horizontal annulus using three-dimensional lattice Boltzmann flux solver. Design/methodology/approach Three-dimensional lattice Boltzmann flux solver is used in the present study for simulating conjugate heat transfer within an annulus. D3Q15 and D3Q7 models are used to solve the fluid flow and temperature field, respectively. The finite volume method is used to discretize mass, momentum and energy equations. The Chapman–Enskog expansion analysis is used to establish the connection between the lattice Boltzmann equation local solution and macroscopic fluxes. To improve the accuracy of the lattice Boltzmann method for curved boundaries, lattice Boltzmann equation local solution at each cell interface is considered to be independent of each other. Findings It is found that the maximum heat transfer rate occurs at low fin spacing especially by increasing the fin height and decreasing the internal-cylindrical distance. The effect of inner cylinder eccentricity is not much considerable (up to 5.2% enhancement) while the impact of fin eccentricity is more remarkable. Negative fin eccentricity further enhances the heat transfer rate compared to a positive fin eccentricity and the maximum heat transfer enhancement of 91.7% is obtained. The influence of using perforated fins is more considerable at low fin spacing although some heat transfer enhancements are observed at higher fin spacing. Originality/value The originality of this paper is to study three-dimensional natural convection in a finned-horizontal annulus using three-dimensional lattice Boltzmann flux solver, as well as to apply symmetry and periodic boundary conditions and to analyze the effect of eccentric annular fins (for the first time for air) and perforated annular fins (for the first time so far) on the heat transfer rate.

Comparative analysis of the lattice Boltzmann method and the finite difference technique of thermal convection in closed domains with heaters

“…Pasha et al (2022) have used FEM and Akbari–Ganji’s method for investigation of conduction heat transfer and fluid flow in a vertical channel. Some interesting results can be found in Pasha et al (2021), Peiravi and Ganji (2022), Hejri et al (2021), Ashouri et al (2022).…”

Simulation of phase change during the freezing of unsaturated porous media by using a coupled lattice Boltzmann model

“…However, as human exploration advances, more scenarios for heat transfer research are being developed, and microscopic structures such as porous media are one of the particularly significant ones (Lewis et al , 1996). Multiphase transition phenomena in porous media are widely found in nature and industrial applications, such as natural gas–oil hydrate development in the ocean (Zhang et al , 2022a), fluid with natural convection (Ashouri et al , 2021; Pu et al , 2019), food processing, treatment of pollutants, application of fuel cell (Liu and Wu, 2016; He et al , 2009) and so on (Imani and Mozafari-Shamsi, 2022). Comprehending the process of liquid–gas phase transition within porous structures is pivotal for elucidating natural phenomena and enhancing industrial processes.…”

Thermal-hydraulic performance of turbulent flows across a heated round tube installed through several perforated twisted tapes

“…However, few publications focused on how bored twisted tape inserts affect the turbulent thermal convection and hydraulic loss along with a heated one. Ashouri et al (2022) estimated numerically the influences of various parametric conditions for the perforated fins on the thermal fluid flow through a horizontal finned tube. The outcomes displayed that small fin spacing provided the best heat transformation, particularly as the fin height increased and the internal cylindrical distance declined.…”