Investigation of the Influence of Pressing Belts Tension of the Back Circuit of Press - Selective PR-1.5

Abstract

A brief analysis of suspension mechanisms and ways to improve the quality of press harvesting for flax harvesting is considered. By researching the mathematical model, the authors prove the possibility of increasing the stability of the elastic characteristics of the suspension mechanisms by changing the angle between the levers or changing the geometry of the structure, for example, the attachment point of a two-arm lever. Particular attention is drawn to the new term “reduced rigidity” of the suspension mechanism. Using this notion and the method of its determination, the authors recommend determining the optimal value of the reduced stiffness of the suspension in the way of mathematical modeling and using this indicator as the main optimization parameter. The results of theoretical and experimental studies were presented by the authors in the form of elastic characteristics of the suspension mechanisms. When conducting a study of the mathematical model, it is suggested to take into account the condition of equality of the maximum values of the moments of forces from the action of the tension forces of the belts or the mass of the working element and the moment of forces acting on the side of the tension springs. During the research of the suspension mechanism, the actual dimensions of the PR-1.5 baler design were adopted. At the same time, we briefly describe the design of the improved tensioning mechanism of a baler for flax harvesting. A rather detailed analysis is given by the authors of the obtained elastic characteristics of the suspension mechanism. Some new features of the elastic characteristics of the suspension mechanism that have not been previously detected are described. To confirm the correctness of the reasoning, the authors implemented their research in a real press-picker and conducted field research that confirmed the possibility of improving the quality of the upgraded version of the machine. To confirm the results of the research, the authors presented a fragment of the field test protocol. The task is solved, uniformity of the roll density is ensured and its density is increased.