Investigation of the properties of fiberboards made from microcrystalline cellulose and antimony trioxide added melamine formaldehyde adhesive

Torun, Sevda Boran

doi:10.1016/j.ijadhadh.2021.103084

Cited by 4 publications

(2 citation statements)

References 31 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…They reported water absorption values of 120% to 160%, which is more than twice that of Panel T1 (59.5%). On the other hand, Boran Torun [26] obtained water absorption values between 20% and 25% for MDF made using a mixture of beech and pine fibers. Note that while water absorption is commonly reported in the literature, it is not considered in ANSI standard A208.2.…”

Section: Thickness Swelling and Water Absorptionmentioning

confidence: 99%

Physical and Mechanical Properties of Fiberboard Made of MDF Residues and Phase Change Materials

Rodríguez,

Bustos Ávila,

Cloutier

2024

Forests

View full text Add to dashboard Cite

The wood-based panel industry is experiencing an excessive accumulation of solid residues from the production of medium-density fiberboard (MDF) panels and moldings. It is possible to create new MDF products with acceptable physical and mechanical properties by revaluing MDF residues. Additionally, those products’ thermal properties can be improved by incorporating phase change materials (PCMs). This study aims to develop a wood-based fiberboard made of MDF residues, capable of storing thermal energy. Two types of PCMs (liquid and microencapsulated), two PCM ratios (2% and 6%), and two types of adhesives (urea-formaldehyde and phenol-formaldehyde) were used to produce eight different types of panels. The vertical density profile, thickness swelling, water absorption, internal bond (IB), and static bending properties—modulus of elasticity (MOE) and modulus of rupture (MOR)—were determined for each panel type. The specific heat of the panels was also determined. The results show the panels’ densities were greater than 700 kg/m3. Thickness swelling in water improved by 23% compared to the reference value of the control panel PCMs after PCM incorporation. The highest IB value was 1.30 MPa, which is almost three times the minimum required by regulation standards. The incorporation of PCMs reduced the panels’ bending properties compared to the properties of the control panels. Even though the values obtained are sufficient to comply with the minimum values set out in ANSI standard A208.2 with an MOE value of 2072.4 MPa and the values obtained are sufficient to comply with the minimum standards with an MOE value of 2072.4 MPa and an MOR value of 16.4 MPa, when microencapsulated PCM is used, the specific heat of the panels is increased by more than 100% over that of the control panels. This study developed fiberboards with adequate physical and mechanical properties and capable of storing thermal energy.

show abstract

Section: Thickness Swelling and Water Absorptionmentioning

confidence: 99%

Physical and Mechanical Properties of Fiberboard Made of MDF Residues and Phase Change Materials

Rodríguez,

Bustos Ávila,

Cloutier

2024

Forests

View full text Add to dashboard Cite

show abstract

“…In order to counteract this issue, boric acid, borax pentahydrate or borax decahydrate, ammonium phosphate, ammonium sulfate, aluminum trihydrate, aluminum sulfate, and gypsum can be used as chemical fire retardants for cellulose [ 226 , 227 , 228 ]. In most cases, these chemicals are used in combination with two or three different chemicals.…”

Section: Flame Retardant Coating Formulations and Designs: The Implem...mentioning

confidence: 99%

Flame Retardant Coatings: Additives, Binders, and Fillers

et al. 2022

View full text Add to dashboard Cite

This review provides an intensive overview of flame retardant coating systems. The occurrence of flame due to thermal degradation of the polymer substrate as a result of overheating is one of the major concerns. Hence, coating is the best solution to this problem as it prevents the substrate from igniting the flame. In this review, the descriptions of several classifications of coating and their relation to thermal degradation and flammability were discussed. The details of flame retardants and flame retardant coatings in terms of principles, types, mechanisms, and properties were explained as well. This overview imparted the importance of intumescent flame retardant coatings in preventing the spread of flame via the formation of a multicellular charred layer. Thus, the intended intumescence can reduce the risk of flame from inherently flammable materials used to maintain a high standard of living.

show abstract

Enhancing the Mechanical Properties of Basalt Fiber and Stainless Steel Wire Mesh Composites Incorporating Fire Retardants Through Response Surface Methodology Optimization

Prabhu,

Selvam,

Kumar

2024

Fibers Polym

View full text Add to dashboard Cite

Investigation of the properties of fiberboards made from microcrystalline cellulose and antimony trioxide added melamine formaldehyde adhesive

Cited by 4 publications

References 31 publications

Physical and Mechanical Properties of Fiberboard Made of MDF Residues and Phase Change Materials

Physical and Mechanical Properties of Fiberboard Made of MDF Residues and Phase Change Materials

Flame Retardant Coatings: Additives, Binders, and Fillers

Enhancing the Mechanical Properties of Basalt Fiber and Stainless Steel Wire Mesh Composites Incorporating Fire Retardants Through Response Surface Methodology Optimization

Contact Info

Product

Resources

About