Investigation on Nonisothermal Dehydrogenation Behavior of Mg–Ni–La–H Materials Prepared by Mechanochemical Reaction

Abstract

Mg10NixLa–H alloys are synthesized by mechanochemical reaction starting with Mg–Ni–La multiphase polycrystalline alloys prepared by resistance melting furnace. The nonisothermal hydrogen desorption behaviors are investigated herein. All prepared samples are characterized by scanning electron microscopy, X‐ray diffraction, fully automatic fast surface and porosity analysis meter Brunauer–Emmett–Teller (BET), differential scanning calorimetry, and thermogravimetric analyzer to get information of phase compositions, microstructure, BET surface area, and dehydrogenation properties. The results demonstrate that Mg10NixLa–H exhibits enhanced nonisothermal hydrogen desorption behavior owing to the synergistic effects among hydrides. The main peak dehydrogenation temperatures for Mg10Ni5La–H, Mg10Ni10La–H, and Mg10Ni15La–H alloys are 375.3, 374.4, and 359.7 °C at 5 °C min−1, respectively. And the apparent activation energy for Mg10Ni5La–H, Mg10Ni10La–H, and Mg10Ni15La–H is 111.7, 275.5, and 184.7 kJ mol−1, respectively. However, the actual hydrogen release capacities of Mg10Ni5La–H, Mg10Ni10La–H, and Mg10Ni15La–H are about 5.09, 3.98, and 4.49 wt%, respectively. Mg10Ni15La–H exhibits the lowest onset dehydrogenation temperature due to its reduced particle size and uniformly distributed hydride phase. The modification of Mg‐based hydrogen storage materials by combining mechanochemical reaction and multiple microalloying is essential for further improvement of thermal properties.