Leaching of Gallium from Coal Fly Ash, Alumina and Sediment Samples with an Acid Mixture for its Determination by ICP-OES

Abstract

Leaching of gallium (Ga) from coal fly ash, alumina and sediment is reported for its determination by inductively coupled plasma optical emission spectrometry (ICP-OES). A mixture of acids (H2SO4, HNO3 and HF) was used for the leaching process which was carried out overnight at room temperature or heated for 1 h on a hot plate. HF is essential for the quantitative recovery of Ga from coal fly ash. Leaching with either HCl or HNO3 in combination with HF also yielded quantitative recoveries of Ga from coal fly ash, but not from other matrices. After leaching, HF and HNO3 were evaporated and HCl was added to the acid leach before dilution for analysis. When mixed acid leaching was employed, leaching of Ga was 92-102%. For accuracy, the method was applied to a sediment sample, a candidate material prepared as the in-house CRM, and the values obtained were well within the uncertainty reported. The present procedure was validated using the solvent extraction method. The values by the two methods were in close agreement according to the Student’s t-test with a confidence level of 95%. The limit of detection was 0.45 mg Kg-1. The analytical methodology was applied for the determination of Ga in three coal fly ash samples, two from thermal power plants and a NIST CRM 1633b (not certified for Ga) as well as an alumina sample from an aluminum industry facility. A red mud sample, by-product of Bayer’s process of aluminum extraction, was also analyzed using HCl/HF and HNO3/HF leach.

Array Point Discharge as Enhanced Tandem Excitation Source for Miniaturized Optical Emission Spectrometer

“…This promotes a great demand for miniaturized and even portable instruments for field analysis of trace heavy metals. Although traditional analytical atomic spectrometry, including atomic absorption spectrometry (AAS), , atomic fluorescence spectrometry (AFS), , optical emission spectrometry (OES), − and atomic mass spectrometry (MS), − are the most mature and predominant analytical methodologies for inorganic elements, with high sensitivity, selectivity, and accuracy, they also suffer several severe shortcomings for field analysis, including large instruments, high power consumption, and complicated instrumental operation derived from their initial design based on laboratory applications. Therefore, it is greatly desired to develop miniaturized atomic spectrometers for field analysis of heavy metals …”

Elemental Imaging of Fertilized ZnO NP Wheat Endosperms Using Laser Ablation–Inductively Coupled Plasma Optical Emission Spectrometry

“…Elemental imaging techniques based on laser ablation (LA) sampling can intuitively display the distribution and content of elements in various solid materials, − and it is very helpful to study element migration and the interaction between elements in wheat grain. As one of the most used instruments in analytical laboratories, the inductively coupled plasma optical emission spectrometry (ICP-OES) instrument has the advantages of ease of use, multiple elements’ detection, and relatively low operational cost. − The detection ability of the LA-ICP-OES instrument can reach submg·kg –1 levels, which makes it suitable for the detection of most elements in plant materials, such as K, Ca, Na, Mg, Mn, Fe, Cu, Sr, Zn, and Ba …”

Uptake And Translocation Of ZnO Nanoparticles In Rice Tissues Studied By Single Particle-ICP-MS

“…Most traditional solution nebulization sampling techniques (such as atomic absorption spectroscopy (GFAAS), inductively coupled plasma optical emission spectroscopy (ICP-OES), and inductively coupled plasma mass spectrometry (ICP-MS) have limitations in the quantification of metal NPs in plant tissues. [15][16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31] In particular, they cannot distinguish between Zn 2+ and ZnO-NPs signals, leading to significant bias. 32 Compared with traditional ICP-MS, single particle ICP-MS (SP-ICP-MS) enables the qualitative and quantitative analyses of target analytes (including their particle size distribution) in biological and environmental samples.…”