Legged Fire Fighter Robot Movement Using PID

Abstract

Proportional Integral Derivative (PID) control is a control system commonly used by industry. Approximately 90% of industrial equipment uses a PID controller because it is easy to use. In the Indonesian Fire Extinguisher Robot Contest (IFERC), the contested robots must follow the contours of the walls of the arena. A Fire extinguisher robot navigation was chosen because the race arena of the competition consisted of walls with different aisles and rooms. The navigation robots used PID control. This study designed and implemented a control algorithm for legged fire extinguishing robots using the PID method, where the PID control was processed in a microcontroller. The angles for each servo motor generated by the calculation of the PID enable the robot to navigate by taking decisions to move quickly or slowly, turn right, turn left and stop. The robot's proximity sensor data and fire sensors enable the fire to be extinguished. The result showed that the robot can carry out its duties optimally.

Fuzzy Logic Based Industrial Control System Design

“…Changing the algorithm is enough to change the program in the microcontroller which is relatively easier than changing the hardware. In this study we used the AT89S52 Microcontroller which is a family of MCS '51 [35]- [38].…”

Implementation of a Camera Sensor Pixy 2 CMUcam5 to A Two Wheeled Robot to Follow Colored Object

“…Siegwart and Nourbakhsh define two assumptions on a robot wheel used to derive kinematics equations and inverse kinematics. For kind of fixed standard wheel, these two assumptions are stated in equation ( 5) and equation (6).…”

“…The use of robot technology in various fields has been used by humanity [1] - [3]. With more advanced technology, it will be more affordable and robust [4] - [6].…”

Automatic Tooth Color Tester Device

“…LEDs provide light to the object so that the light is reflected to the LDR [9]- [14], where the output from the LDR will be input to the amplifier to be strengthened so that the ADC can read it. The output from the amplifier will go into the ADC circuit to be converted into digital data where the output will be processed by the IC microcontroller [15]- [20] which then the processed results will be displayed on the LCD. To repeat the inspection then press the clear button.…”