Low Blind Zone Atmospheric Lidar Based on Fiber Bundle Receiving

Abstract

Atmospheric constituents feature a large vertical gradient in concentration, especially at the first few hundred meters over the earth’s surface. Atmospheric lidar usually cannot cover this range due to the incomplete overlap effect or the limited dynamic range of detectors. This drawback is well known as the blind zone effect, which hinders the application of atmospheric lidars in many aspects. In this work, a method based on an optical fiber bundle was proposed to mitigate the blind zone effect. An optical fiber head with several stages, installed at the focal plane of the telescope, is used to receive backscatter light from different range levels. The design of the optical fiber head is analyzed with the ray-tracing technique. The optical fiber installed at the highest stage of the fiber head can collect far-range light like a small aperture, and all the other optical fibers are bundled into a near-range detection channel to receive backscatter light from the first few hundred meters. This special design can avoid the near-range light loss in conventional lidar systems, usually equipped with a small aperture. Different optical attenuations are then applied to near-range and far-range channels to suppress the overall signal dynamic range. This light-receiving method was applied in a 1030 nm elastic lidar, in which a fiber bundle with a three-stage fiber head was fabricated and installed. A test experiment was performed to verify this approach. A good agreement between simulations and in-system results was found. Based on this design, the blind zone of the lidar system is less than 50 m, and the detectable range can be over 10 km along the lidar’s line of sight with a single telescope receiver. This approach brings a new way of designing atmospheric lidar with a low blind zone and can strengthen our ability to monitor urban pollution and promote land-atmosphere interaction research.

Understanding the Roles of Aerosols and Clouds in Environment, Meteorology and Climate with Advanced Lidar Remote Sensing Techniques

“…Atmospheric lidar is an important active remote sensing instrument for monitoring the distribution of aerosols and clouds with a very high spatiotemporal resolution. Along with the development of laser technology, optical mechanics, and detectors, the capabilities of atmospheric lidars have been improved substantially over the past decade [4][5][6]. These improvements have also triggered research into lidar retrievals and the exploration of lidar applications in different fields in return.…”