Magnetic Nanoparticle Detection Using Wheatstone Bridge Giant Magnetoresistance (GMR) Sensor with Double CoFeB Spin-Valve Thin Films

Abstract

The Wheatstone bridge-giant magnetoresistance (GMR) sensor with single and double spin valve thin film was successfully developed for potential biomolecular detection. The GMR sensor with spin valves structure of [Ta (2nm)/IrMn (10nm)/CoFe (3nm)/Cu (2,2nm)/CoFeB (10nm)/Ta (5nm)] was fabricated using DC Magnetic Sputtering method. The Fe3O4 magnetic nanoparticles were synthesized by the co-precipitation method as a magnetic label. The magnetic properties of the Fe3O4 nanoparticles measured are the saturation magnetization (Ms) of 77.7 emu/g, remanence magnetization (Mr) of 7.7 emu/g, and coercivity (Hc) of 49 Oe. The X-ray diffraction pattern showed the inverse cubic spinel structure with an average crystal size of about 20.1 nm. Fe3O4 magnetic nanoparticles with various concentrations were used to be detected using a GMR sensor. The output voltage of the GMR sensor with the single and double spin-valve increased from 1.7 to 3.9 mV and 2.9 to 5.3 mV with the increase of the Fe3O4 concentration from 0 to 20 mg/mL, respectively.

GMR Biosensor Based on Spin-Valve Thin Films for Green-Synthesized Magnetite (Fe₃O₄) Nanoparticles Label Detection

“…Using a similar apparatus, Antarnusa et al detected streptavidin and amylase [7]. GMR SV thin films has been utilized as a more sensitive sensing element to detect formalin and gelatin [8], core-shell Fe3O4@Ag [5,9], and Fe3O4/PEG [10]. The preferred method to produce Fe3O4 as the magnetic label was chemical coprecipitation due to the efficient and straightforward synthesis route.…”