Magnetite/graphene nanosheet composites: interfacial interaction and its impact on the durable high-rate performance in lithium-ion batteries

Zhou, Ji; Song, Huaihe; Ma, Lulu; Chen, Xiaohong

doi:10.1039/c1ra00402f

Cited by 345 publications

(196 citation statements)

References 76 publications

Supporting

Mentioning

179

Contrasting

Order By: Relevance

“…Unfortunately, none of these enabled satisfactory long term stability (maximum 100 cycles), and most of them showed a high 1 st cycle irreversible capacity (see Table 2 ). At the same time, previously reported graphene-containing alloy (e.g., Sn, [ 144 ] SnO 2 [145][146][147][148][149] or Si [150][151][152][153] ), conversion (e.g., Fe 3 O 4 , [154][155][156][157] Co 3 O 4 [158][159][160][161] or CuO [162][163][164] ) and insertion (e.g., TiO 2 [165][166][167][168] or LTO [169][170][171] ) hybrids were further improved. Interestingly, some appealing approaches, such as the use of ternary hybrids (e.g., RGO/SnO 2 /Fe 3 O 4 [ 172 ] or RGO/CNT/ Sn [ 173 ] ), porous 3D (e.g., RGO/Fe 3 O 4 [ 174,175 ] ) and hollow architectures (e.g., RGO/Fe 3 O 4 [ 176 ] and RGO/TiO 2 [ 168 ] ), were introduced.…”

mentioning

confidence: 75%

Critical Insight into the Relentless Progression Toward Graphene and Graphene‐Containing Materials for Lithium‐Ion Battery Anodes

et al. 2016

View full text Add to dashboard Cite

that its extraordinary properties would enable revolutionary new technologies, which gave birth to the "graphene era". [ 3,4 ] Relying on this scenario, in 2013, the European Union launched the ¤1 billion "Graphene Flagship" project aimed to investigate the properties of this new form of carbon for various applications (e.g., electronics, sensors and energy storage devices), with the ambitious goal of guiding graphene from laboratories to commercial applications within a decade. [ 5,6 ] In the same period, the Chinese Government set up a similar investment to mass-produce graphene as thin fi lms (e.g., for touchscreen electrodes) and platelets (e.g., for use in batteries). [ 6 ] In the following years, hundreds of patents, mainly focused on manufacturing and application in energy storage, were fi led and the worldwide production of graphene and graphene-containing materials rapidly increased. Although a few Chinese industries claimed to already use graphene-containing materials for smartphone production, no revolutionary practical application relying on graphene has been yet developed. [ 6 ] Specifi cally with respect to the battery fi eld, a close analysis of the scientifi c literature reveals a struggle to meet the ambitious initial targets. A potential loss of focus from the fi nal application caused by hype and ease of publication on such a novel matter, together with the delivery of very misleading information [ 7,8 ] and erroneous statements [ 7 ] concerning the use of graphene in batteries are emerging as possible reasons of the ineffective graphene-era outburst. In this progress report, we do not focus on production and classifi cation of graphene and graphene-containing materials, which were already well reported in the past years. [ 3,[9][10][11] In contrast, due to the lack of an exhaustive analysis of the progression of the use of such materials in lithium-ion battery (LIB) anodes, we report here a critical evaluation of the most prominent research papers published from 2008 until the end of 2015. As shown in Figure 1 , three different stages of the graphene research in LIB anodes can be distinguished: a fi rst stationary phase between 2008 and 2010 where the lithium-ion storage properties of different graphene and graphene-containing materials were preliminarily explored, a second exponential stage, spanning from 2010 to 2014, where graphene and graphene-containing anode materials were broadly developed and investigated, and fi nally, a third phase, (i.e., starting from 2015), where the research seems to have approached a plateau. After Used as a bare active material or component in hybrids, graphene has been the subject of numerous studies in recent years. Indeed, from the fi rst report that appeared in late July 2008, almost 1600 papers were published as of the end 2015 that investigated the properties of graphene as an anode material for lithium-ion batteries. Although an impressive amount of data has been collected, a real advance in the fi eld still seems to be missing. In this framework, atten...

show abstract

mentioning

confidence: 75%

Critical Insight into the Relentless Progression Toward Graphene and Graphene‐Containing Materials for Lithium‐Ion Battery Anodes

et al. 2016

View full text Add to dashboard Cite

show abstract

“…It can be noted that nite amount of O 1s signal in XPS survey spectrum of GNS has been reported in several recent reports of GNS synthesis using different routes. [83][84][85] Usually GNS samples are obtained by the reduction of graphite oxide (GO) and it is not always possible to reduce the attached oxygen functional group completely which is detrimental to the electrical properties of graphene. However, in our case, almost complete absence of O 1s signal indicates the effectiveness of used synthesis procedure in removing oxygen functional group.…”

Section: Resultsmentioning

confidence: 99%

Graphene boosts thermoelectric performance of a Zintl phase compound

et al. 2015

View full text Add to dashboard Cite

The concept of nanocomposites derived by incorporating a second minor phase in bulk thermoelectric materials has established itself as an effective paradigm for optimizing high thermoelectric performance.In this work, this paradigm is for the first time extended to bulk Zintl phase Mg 3 Sb 2 and its isoelectronically Bi-doped derivative Mg 3 Sb 1.8 Bi 0.2 system. Herein, we report the synthesis, microstructural details, electronic structure and thermoelectric properties of (Mg 3 Sb 2 , Mg 3 Sb 1.8 Bi 0.2 )/ graphene nanosheet (GNS) nanocomposites with different mass ratios. Field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM) investigation reveals that Mg 3 Sb 2 nanoparticles are homogenously anchored on the surface of GNS. We demonstrate that Mg 3 Sb 2 -based materials incorporated with a small content of graphene outperform optimally, resulting in potential ptype thermoelectric materials. The present nanocomposite additive of GNS deriving such a novel nanocomposite of (Mg 3 Sb 2 , Mg 3 Sb 1.8 Bi 0.2 )/GNS, enhances the electrical conductivity significantly, thereby resulting in a substantially large increase in the power factor. The enhanced electrical conductivity of these nanocomposites is attributed to the increase in the carrier concentration and high carrier mobility owing to the ultra high mobility of graphene. X-ray photoelectron spectroscopy (XPS) core level spectra confirm weak bonding between GNS and Mg 3 Sb 2 . Increase in carrier concentration is reflected in XPS valence band spectra and change in spectral weight near valence band maxima is indicative of increased electrical conductivity in the nanocomposite material. The thermal conductivity of these nanocomposites is noted to be reduced at high temperature. These favorable conditions lead to enhanced thermoelectric figure-of-merit (ZT) z 0.71 at 773 K for Mg 3 Sb 2 /GNS and a ZT z 1.35 at 773 K for Mg 3 Sb 1.8 Bi 0.2 /GNS nanocomposites with the mass ratio of 80 : 1 which are $170% and $125% higher values compared to bare Mg 3 Sb 2 and bare Mg 3 Sb 1.8 Bi 0.2 respectively. We strongly believe that the present novel strategy of fabricating such a nanocomposite of a Zintl compound by utilizing GNS as a nanocomposite additive, may provide an emerging path for improving thermoelectric properties of various Zintl phase compounds.

show abstract

“…The inset to figure 3 evidences a red-shift of G-peak (1589.7 cm -1 ) after functionalization. The G band shift and reduction of the 2D are result of charge transfer between the graphene and PCA molecules [43,44], thus indicating surface functionalization of GF surface with PCA molecules via non-covalent method.…”

Section: Figure 3 Raman Spectra Of As Grown Gf and Functionalized Gf mentioning

confidence: 99%

Functionalized graphene foam as electrode for improved electrochemical storage

Bello

Fabiane

Momodu

et al. 2014

J Solid State Electrochem

View full text Add to dashboard Cite

We report on a non-covalent functionalization of graphene foam (GF) synthesised via chemical vapor deposition (CVD). The GF was treated with pyrene carboxylic acid (PCA) which acted as a source of oxygen and/ or hydroxyl groups attached to the surface of the graphene foam for its electrochemical performance improvement.The modified graphene surface enabled a high pseudocapacitive effect on the GF. A specific capacitance of 133.3 F g -1 , power density ∼145.3 kW kg -1 , and energy density ∼4.7 W h kg -1 was achieved based on the functionalized foam in 6 M KOH aqueous electrolyte. The results suggest that non-covalent functionalization might be an effective approach to overcome the restacking problem associated with graphene electrodes and also signifies the importance of surface functionalities in graphene based electrode materials.

show abstract

Magnetite/graphene nanosheet composites: interfacial interaction and its impact on the durable high-rate performance in lithium-ion batteries

Cited by 345 publications

References 76 publications

Critical Insight into the Relentless Progression Toward Graphene and Graphene‐Containing Materials for Lithium‐Ion Battery Anodes

Critical Insight into the Relentless Progression Toward Graphene and Graphene‐Containing Materials for Lithium‐Ion Battery Anodes

Graphene boosts thermoelectric performance of a Zintl phase compound

Functionalized graphene foam as electrode for improved electrochemical storage

Contact Info

Product

Resources

About