Main aspects of kerosene and gaseous fuel ignition in aero-engine

Abstract

Various liquid and gaseous alternative fuels have been proposed to replace the kerosene as aircraft fuel. Furthermore, new combustion technologies were developed to reduce the emissions of aero-engine. A staged fuel injection arrangement for a lean burn combustion system was applied to improve the operability of an aero-engine by achieving high flame stability at reduced combustion emissions. Originally, both circuits (pilot and main) are fuelled by kerosene; moreover, the pilot injector is operating at low power (engine idle and approach) and the pilot flame is anchored in an airflow recirculation zone. In the case of the performed research, the pilot injector was modified to allow the use of gaseous fuels. Thus, the burner model allows a flexible balancing of the mass flows for gaseous and liquid fuel. The present paper describes the investigation of ignitability for the proposed staged combustor model fuelled by gaseous and liquid fuels. A short overview on physical properties of used fuels is given. To investigate atomisation and ignition, different measurements systems were used. The effectiveness of two ignitor types (spark plug and laser ignitor) was analysed. The ignition performance of the combustor operating on various fuels was compared and discussed in detail.

Experimental investigations of the fire behavior of composites impacted by kerosene/air turbulent flame

“…14 These fuels have a global application and are carefully formulated to meet specific property requirements, encompassing flash point, freezing point, and energy content, particularly regarding the diffusion behavior of fuel mixtures of gasoline and kerosene. 15 In this process, an atomizer assumes a crucial role by injecting high-pressure fuel into the combustion chamber, creating a spray that expedites vaporization and enhances combustion efficiency. 16 When compared to Said et al's (2018) investigation on the stability of a turbulent diffusion flame in a gas turbine combustor, 17 our comprehension is enhanced through shared insights into the consequences of fluctuating oxygen concentrations on flame stability.…”

“…14 These fuels have a global application and are carefully formulated to meet specific property requirements, encompassing flash point, freezing point, and energy content, particularly regarding the diffusion behavior of fuel mixtures of gasoline and kerosene. 15 In this process, an atomizer assumes a crucial role by injecting high-pressure fuel into the combustion chamber, creating a spray that expedites vaporization and enhances combustion efficiency. 16…”