Maximizing Output Voltage of a Piezoelectric Energy Harvester via Beam Deflection Method for Low-Frequency Inputs

Abstract

In micro-scale energy harvesting, piezoelectric (PZT) energy harvesters can adequately convert kinetic energy from ambient vibration to electrical energy. However, due to the random motion and frequency of human motion, the piezoelectric beam cannot efficiently harvest energy from ambient sources. This research highlights the ability of piezoelectric energy harvester constructed using a PZT-5H cantilever beam to generate voltage at any input frequency from human motion. An eccentric mass is used to convert the linear motion of human movement to angular motion. Then, using a magnetic plucking technique, the piezoelectric beam is deflected to its maximum possible deflection each time the eccentric mass oscillates past the beam, ensuring the highest stress is induced and hence the highest current is generated. For testing works, the frequency of oscillation of the eccentric mass is controlled using an Arduino Uno microcontroller. In this work, it is found that when given any input frequencies, the energy harvester produced a consistent AC voltage peak around 5.8 Vac. On the other hand, the DC voltage produced varies with respect to the input frequency due to the number of times the peak AC signal is generated. The highest DC voltage produced in this work is 3.7 Vdc, at 5 Hz, which is within the frequency range of human motion. This research demonstrated that energy can still be effectively harvested at any given low-frequency input, in the condition that the piezoelectric beam is being deflected at its maximum. ABSTRAK: Piezoelektrik dapat mengubah tenaga kinetik daripada getaran persekitaran kepada tenaga elektrik melalui penjanaan tenaga berskala mikro. Namun, PZT tidak dapat menjana tenaga dengan berkesan dari sumber persekitaran kerana pergerakan dan kekerapan pergerakan manusia adalah rawak. Kajian ini adalah mengenai keupayaan penuai tenaga piezoelektrik menggunakan bilah kantilever PZT-5H bagi menjana voltan pada sebarang frekuensi menerusi gerakan manusia. Jisim eksentrik digunakan bagi menukar gerakan linear manusia kepada gerakan putaran. Kemudian, teknik penjanaan piezoelektrik secara magnetik digunakan bagi memesongkan bilah piezoelektrik ke tahap maksimum. Bagi memastikan tenaga tertinggi dihasilkan, jisim eksentrik perlu berayun melepasi bilah PZT. Ayunan frekuensi jisim eksentrik ini dikawal melalui kawalan mikro Arduino Uno. Dapatan kajian menunjukkan bagi setiap frekuensi input, PZT ini dapat menghasilkan voltan AC yang konsisten, iaitu sekitar 5.8 Vac. Namun, voltan DC maksimum yang terhasil adalah berbeza-beza bagi setiap frekuensi input, iaitu berdasarkan bilangan kekerapan maksimum isyarat AC yang terhasil. Voltan DC tertinggi ialah 3.7 Vdc, pada 5 Hz, iaitu pada kadar frekuensi gerakan manusia. Ini menunjukkan bahawa tenaga masih dapat dihasilkan secara berkesan pada frekuensi rendah, dengan syarat bilah piezoelektrik terpesong pada tahap maksimum.

Performance of piezoelectric energy harvester with vortex-induced vibration and various bluff bodies

“…Vibration is the embodiment of mechanical energy in an elastic system of some sort continuously changing from mechanical kinetic to potential energy smoothly over and over again. Many conversions of mechanical energy (waste vibration) converted into electrical energy have been done using electromagnetic [8]- [10], piezoelectric [11]- [16], and electrostatic [17]- [20].…”