Maximum Efficiency per Torque Direct Flux Vector Control of Induction Motor Drives

Abstract

In this paper, a loss-minimizing strategy is proposed for induction motor drives to ensure maximum efficiency operation for a given torque demand. The proposed strategy directly regulates the machine stator flux according to the desired torque, using an optimal stator flux reference. Therefore, the proposed strategy is suitable for motor control schemes that are based on direct flux regulation, such as direct torque control or direct flux vector control. The maximum efficiency per torque (MEPT) stator flux map is computed offline using the traditional no-load and short-circuit tests' data. An iron loss model based on the stator flux and frequency is also proposed for the calibration of the machine loss model and also for on-line monitoring of the iron losses during motor operation. The proposed MEPT strategy has been validated on a 2.2 kW induction machine and the motor efficiency has been measured for different speed values and variable load conditions. The experimental results confirm the effectiveness of the proposed solution. specific resistivity of core material [Ω·m] I. 0093-9994 (c) APPENDIXThe IM rated data and parameters are: rated power 2.2 kW, rated voltage 400V, rated current 5.08A, rated frequency 50Hz, rated speed 1400 rpm, rated torque 15 Nm, R s = 3.37  (25C), R r = 2.2  (25C), L ls = L lr = 16 mH.

A Survey of Broken Rotor Bar Fault Diagnostic Methods of Induction Motor

“…Since then these transformed models have made a very significant contribution towards modeling [27], analysis [28], drives [29], fault diagnostics [30], [31] and design of various kinds of electrical machines.…”

Real-Time Energy-Efficient Actuation of Induction Motor Drives Using Approximate Dynamic Programming

“…Nowadays, model-predictive control (MPC) has gathered a lot of research interest in the context of electric drives due to its capability to optimize arbitrary objective functions and integrate operational constraints [11], [12]. Reliable actuation may hence be combined with secondary objectives, e.g., optimization of the harmonic content [13] or loss minimization in the system [14], [15]. The latter is gaining importance in industry, as energy-efficient operation is directly related to both economical and environmental aspects.…”

DSP improvement of a vector speed induction motor control with a RST and adaptive fuzzy controller

“…The main applications are pumping, ventilation and machine tools. The field-oriented control (FOC) provides high level performance drive and permits a decoupled control of torque and flux [2]. Nowadays, the use of FOC with IM becomes the most used strategy.…”