Abstract. The scarcity of height models is one of the important issues in Indonesia. ALOS PALSAR, X SAR, SRTM C, and ICESAT/GLAS are free available global height models. Four data can be integrated the height models. Integration takes advantage of each characteristic data. The spatial resolution uses ALOS PALSAR. ICESAT/GLAS has a minimal height error because it is DTM. SAR has advantages of minimal error in the highland and need a low pass filter on the lowland. DSM uses X SAR and DEM from ALOS PALSAR. Characteristics and penetration of vegetation objects can be seen from the wavelength type of SAR data. This research aims to make height model integration in order to get the vertical accuracy better than vertical accuracy of global height models and minimum height error. The study area is located in Karo Regency. The first process is to crop the height models into Karo Regency, geoid undulation correction using EGM 2008. The next step is to detect pits and spires by using radius value 1000 m and depth +1.96σ (+5 m) with uncertainty 95,45%. Then generate HEM and height model integration. To know the accuracy of this height model, 100 reference points measured using GNSS, altimeter, and similar point observed on the height model integration are selected. The accuracy test covers RMSE, accuracy (z), and height difference test. The result of this study shows that the height model integration has a vertical accuracy in 1.14 m. This height model integration can be used for mapping scale 1: 10.0000. Height models can be created from optical, radar, microwave, lidar, and sonar data (Bhardwaj et al., 2013): (Mitchell and MacNabb, 2010). Height model of the optical data using optical satellite imagery data, aerial photographs, video (Deilami and Hashim, 2011). In the optical data, height model using stereo models (Saldana et al., 2012) height model on the radar data using stereo models, interferometry, and depth cue perceptive. Height models are made by sonar can use data Interferometry Synhetic Aperture Sonar (IFSAS) data (Julzarika, 2011b). Height models or also known as 3D model is a view of a model with the 3D coordinate system (polar, geodetic, raster and cartesian) with field-defined reference to a specific projection and datum (Julzarika and Sudarsono, 2009). A height model can be created from radar and optical data. Height models can also be defined as a digital model that gives information about the earth surface shape (topography) in the form of raster or vector data (Freeden et al., 2010). Height models consist of two information, namely: height data and the data of such height position coordinates on the earth's surface (Honikel, 1998).