Measurement of Energy Consumption During a Thermal Drilling Cycle

Abstract

The work presents the issue of measuring and analyzing energy consumption during a thermal drilling cycle. A research stand based on a CNC lathe was presented, the equipment of which was an experimental energy consumption system based on an electricity meter and a force gauge. The measuring devices used allowed for recording the load on the power grid, the load on the machine tool drives, the axial force, the drill braking torque, the current rotation of the machine tool spindle, the position of the drill in relation to the workpiece and the values of auxiliary parameter registers in the strategy of adaptive feed control. Two cases of a drilling cycle were considered: making a single hole and making a series of holes in one cycle. Five feed control strategies were tested during the drilling cycle, including adaptive feed control and a recursive feed optimization method. For comparison, holes were also made with traditional HSS twist drills. Based on the obtained test results, it can be concluded that the friction drilling method can be included in the energy-saving methods of making holes in thin-walled elements.