Mechanical and corrosion resistance analysis of laser cladding layer

Abstract

To improve the mechanical properties and corrosion resistance of the hydraulic column in the mine, a semiconductor fiber-coupled laser was used to laser-clad iron-based alloy powder on a 27SiMn steel substrate (SUB). The microstructure, mechanical properties, and corrosion resistance of the obtained cladding layer (CL) were studied based on experiments. Results show that equiaxed grains at the top of the CL are fine and tightly arranged. Compared with the SUB, the CL average microhardness is increased by 0.3 times, the average friction coefficient is decreased by 0.12, and the wear amount is significantly reduced. The bonding strength between the CL and the SUB is good, and the tensile strength is increased by 10.82%. Compared with the SUB, the mechanical properties and corrosion resistance of the CL are better. The research has an important guiding significance for the practice of hydraulic column repair and strengthening engineering.

Flexural and corrosion behaviour of WC-10Co-4Cr + Graphene sprayed on textured HSLA-steel

“…To enhance the usability in corrosive medium. The surface of naval steel is commonly treated with laser cladding to increase its durability, corrosion resistance, and erosion resistance [14]. Rather than this, weld overlays of wear-resistant materials, like AISI 304 and AISI 308, are also employed to address the wear problems associated with HSLA steel.…”