Mechanism and Control Scheme of Central Defects in Cross Wedge Rolling of Railway Vehicle Axles

Abstract

Faced with a great demand for railway axles, the cross wedge rolling (CWR) process has the advantages of high efficiency and material saving, and good forming quality of axles is significant for railway transportation safety. The stress inside the railway axle of CWR was analyzed by the finite element method. It was found that the center of the rolled piece is subjected to tensile stress in transverse and axial directions and compressive stress in radial direction, making it more prone to defects. By simulating the evolution of micro voids in the center of the CWR piece, it was found that the presence of voids makes the strain around them significantly large and concentrated and the material between the voids deforms intensely. When voids expand relative to the rolled piece and the internal necking between voids is significant, void coalescence is easy to occur, and central defects are formed. The influence of process parameters on void evolution was analyzed. The scheme of detaching die was proposed to avoid central defects of the CWR piece and the optimal parameter conditions of CWR of railway axles were determined, which proved that the quality of railway axles formed with optimized parameters meets the technical requirements of railway vehicle axles.

Research Progress on the Manufacturing of Screw-Shaped Parts in Screw Compressors

“…The cross-wedge rolling (CWR) process is a new forging method for metal materials with a near-net-shape for the production of shaft parts, such as screw rotors, steeped axes and shafts [27][28][29][30][31]. Figure 4 shows in detail how the CWR process is achieved [32].…”