Mechatronic Design, Dynamic Modeling and Results of a Satellite Flight Simulator for Experimental Validation of Satellite Attitude Determination and Control Schemes in 3-Axis

Abstract

This paper describes the integration and implementation of a satellite flight simulator based on an air bearing system, which was designed and instrumented in our laboratory to evaluate and to perform research in the field of Attitude Determination and Control Systems for satellites, using the hardware-in-the-loop technique. The satellite flight simulator considers two main blocks: an instrumented mobile platform and an external computer executing costume-made Matlab® software. The first block is an air bearing system containing an FPGA based on-board computer with capabilities to integrate digital architectures for data acquisition from inertial navigation sensors, control of actuators and communications data handling. The second block is an external personal computer, which runs in parallel Matlab® based algorithms for attitude determination and control. Both blocks are linked by means of radio modems. The paper also presents the analysis of the satellite flight simulator dynamics in order to obtain its movement equation which allows a better understanding of the satellite flight simulator behavior. In addition, the paper shows experimental results about the automated tracking of the satellite flight simulator based a virtual reality model developed in Matlab®. It also depicts two different versions of FPGA based on-board computers developed in-house to integrate embedded and polymorphic digital architectures for spacecrafts applications. Finally, the paper shows successful experimental results for an attitude control test using the satellite flight simulator based on a linear control law.

Development of an axial suspended AMB experimental bench for load and disturbance tests

“…Various other papers on active vibration control in a rotor system, vibration analysis of rolling element bearings defects and mechatronic design and dynamic modeling provides interesting further reading (Arias-Montiel et al, 2014;Saruhan et al, 2014;Mendoza-Bárcenas et al, 2014).…”

Design and in-orbit application of a new generalized fully-configured digital satellite based on software-in-the-loop

“…It can generate the original Telemetry (TM) frames according the frame format of the real satellite, execute and respond the Telecommand (TC) correctly, provide the real TM, TC, and external data interface for the TT&C ground test system [6].The Attitude Determination and Control System (ADCS) is a core module of a satellite platform, whose main function is to ensure the spacecraft will be pointing towards required targets either in earth or in space. When a satellite is placed in space orbit, and depending on its orbital altitude, it is subject to a number of environmental perturbations which deflect it from the desired orientation [1].…”

Modeling and design of a multidisciplinary simulator of the concept of operations for space mission pre-phase A studies

“…Applied throughout the design phases of the development lifecycle, M&S may show up in different applications such as computer-aided design (CAD) and computer-aided engineering (CAE) models for sizing system elements or in simulators of equipment, subsystems, and even the entire spacecraft together with the space environment and ground stations (Hua-Yi, 2014; Mendoza-Bárcenas et al, 2014; Triharjanto et al, 2015; Wang et al, 2017).…”