Method to Achieve High Speed and High Recognition Rate of Goal from Long Distance for CanSat

Abstract

A structure is proposed for high-speed goal recognition by SSD MobileNet using the Coral USB Accelerator. It was confirmed that the goal recognition rate from a long distance is equal to or better than that of conventional methods. Using this method, two CanSat contests were won. The aim of the CanSat competitions is to guide the CanSat to a distance of 0 m from the goal. It is initially guided by GPS but must eventually employ an image recognition model to identify the nearby goal. Zero-meter guidance to the goal was achieved in the Tanegashima Rocket Contest 2018 using a method that recognized the color of the goal by the color of the image, but it was vulnerable to changes in lighting conditions, such as weather changes. Therefore, a deep-learning method for CanSat goal recognition was applied for the first time at ARLISS 2019, and the zero-distance goal was achieved, winning the competition. However, it took more than 10 s for recognition owing to the CPU calculations, making it time consuming to reach the goal. The conventional method uses image classification to recognize the location of a goal by preparing multiple regions of interest (ROIs) in the image and repeating the recognition operations for each ROI. However, this method has a complex algorithm and requires the recognition of more ROIs to recognize goals over long distances, which is computationally time consuming. Object detection is an effective method to identify the location of the target object in an image. However, even if the lightest SSD MobileNet V1 and V2 and a hardware accelerator are used, the computation time may not be short enough because the computer is a Raspberry Pi Zero, the weakest class of Linux computers. In addition, if SSD MobileNet V1 and V2 do not have a sufficiently high recognition rate at long distances from the goal compared with conventional methods, it will be difficult to adapt them to a CanSat. To clarify this, SSD MobileNet V1 and V2 were applied to a Raspberry Pi Zero connected to a Coral USB Accelerator, and the recognition rate and recognition time were investigated at long distances from the goal. It was found that the recognition rate was equivalent to or better than that of the conventional method, even at long distances from the goal, and that the recognition time was sufficiently short (approximately 0.2 s). The effectiveness of the proposed method was evaluated at the Noshiro Space Event 2021 and Asagiri CanSat Drop Test (ACTS) 2021, and the 0-m goal was achieved at both events.

The CanSat Compendium: A Review of Scientific CanSats

“…Some examples of scholarly work focus heavily on analyzing the hardware, such as the research of Nuñez-Quispe concerning lightweight non-pneumatic wheels equipped to a comeback CanSat [44]. Other works focus primarily on the software side of the CanSat device, such as a report from Akiyama et al, which describes the use of an object identification algorithm to aid in the guidance of a CanSat comeback rover [45]. However, a competition-worthy CanSat must necessarily find a way to harmoniously integrate both hardware and software elements together into a single device.…”