Methods for the in-Situ Characterization of Cast Austenitic Stainless Steel Microstructures

Abstract

Cast austenitic stainless steel (CASS) that was commonly used in U.S. nuclear power plants is a coarse-grained, elastically anisotropic material. Its engineering properties made it a material of choice for selected designs of nuclear power reactor systems. However, the material manufacturing and fabrication processes result in a variety of coarse-grain microstructures that make current ultrasonic in-service inspection of components quite challenging. To address inspection needs, new ultrasonic inspection approaches are being sought. However, overcoming the deleterious and variable effects of the microstructure on the interrogating ultrasonic beam may require knowledge of the microstructure, for potential optimization of inspection parameters to enhance the probability of detection (POD). The ability to classify microstructure type (e.g. polycrystalline or columnar) has the potential to guide selection of optimal NDE approaches. This paper discusses the application of ultrasonic and electromagnetic methods for classifying CASS microstructures, when making measurements from the outside surface of the component. Results to date demonstrate the potential of these measurements to discriminate between two consistent microstructuresequiaxed-grain material versus columnar-grain material. The potential for fusion of ultrasonic and electromagnetic measurements for in-situ microstructure characterization in CASS materials will be explored.

Advances in instrumentation for non-destructive testing and prognostics

“…The issue of providing technologies for on-line monitoring of metal components in a NPP is being researched and now includes work on acoustic emission [14], guided waves [14,17,18], phased array/synthetic aperture focusing (SAFT) [19] and diffuse fields [20]. These methods all use forms of ultrasonics and can potentially be used to detect and monitor relatively large and growing defects, including cracks [14].…”

Assessment of Acoustic Sensor Application to Structural Health Monitoring of Reactor Components

“…The measurement is also sensitive to temperature and material density changes. As a result, ultrasound has been used to characterize degradation, damage [8], and microstructures [9]; quantify and visualize structural changes [10]; and implement process control [11]. It is being actively investigated for post-irradiation examination of fuels [12] and is an excellent candidate for advanced reactor component SHM.…”

Design Requirements for Ultrasonic Deformation Sensor for TREAT Experiments

“…Ultrasonic measurements have been successfully used for nondestructive materials characterization, including nondestructive evaluation (NDE) of degradation and damage [10], microstructure characterization [11], quantification and visualization of structural changes [12,13] and process control [14]. Ultrasonic NDE is a critical element of the nuclear power industry's in-service inspection program for maintaining the integrity of the pressure boundary [15], and is being actively investigated for postirradiation examination of fuels [16].…”