Micromachined SiO2 microcantilever for high sensitive moisture sensor

Abstract

Ultra-sensitive and selective moisture sensors are needed in various industries for processing control or environmental monitoring. As an outstanding sensor platform, surface-stress sensing microcantilevers have potential application in moisture detection. To enlarge the deflection of the microcantilever under surface stress induced by specific reactions, a new SiO 2 microcantilever is developed which features a much lower Young's modulus than conventional Si or SiN x microcantilevers. For comparing SiO 2 cantilever with Si cantilevers, a model of the cantilever sensor is given by using both analysis and simulation, resulting in good agreement with the experimental data. The results demonstrate the SiO 2 cantilever can achieve a much higher sensitivity than the Si cantilever. In order to fabricate this device, a new fabrication process using isotropic combined with anisotropic dry etching to release the SiO 2 microcantilever beam by ICP (Inductively Coupled Plasma) was developed and investigated. This new process not only obtains a high etch rate at 9.1 lm/min, but also provides good profile controllability, and a flexibility of device design. Attributed to the high sensitivity, a significant deflection amplitude of the surface modified SiO 2 microcantilever was observed upon exposure to 1% relative humidity. The SiO 2 cantilevers are promising for inexpensive and highly sensitive moisture detection.

Micro-machined optical fibre cantilever as sensor elements

“…Curve fitting result shows that a deflection range of 0 to 2450nm in the fibre core area is achieved, which is more than we expected from our calculation above (shown in Fig.10). We believe that this is probably because the cantilever is not a perfect rectangular shape, with a profile that varies along its length the residual error of the cavity length calibrated by ML10 is 15nm to 20nm, demonstrating that our interrogation system is capable of detecting a cantilever deflection change down to a few nanometers, which should be suitable for bio-sensing applications [19][20]. …”

Design and characterization of MEMS-based flow-rate and flow-direction microsensor

“…Such systems possess many advantages compared to their traditional large-scale counterparts, including amongst other things lower power consumption, a higher precision, a more rapid response, an improved portability, and a lower manufacturing cost. Importantly, the functionality and reliability of these micro-sensors can be enhanced through their integration with mature logic IC technology or with other micro-scale devices (Yamazoe 2005;Velanki and Ji 2006;Korotcenkov 2007;Choudhury et al 2007;Tuomas et al 2008;Chen et al 2008;Wang et al 2008).…”

Titanium Dioxide Nanoparticle Humidity Microsensors Integrated with Circuitry on-a-Chip

“…The polyimide capacitive humidity sensor showed a sensitivity of 0.77 pF/RH%. Chen et al [ 6 ] proposed a humidity microsensor with a micromachined silicon dioxide cantilever beam. The fabrication of the sensor combined the isotropic and anisotropic dry etching of inductively couple plasma to release the silicon dioxide cantilever beam.…”