Micron-scale crack propagation in laser-irradiated enamel and dentine studied with nano-CT

Abstract

Objectives The aim of this study was to see the effect of Er:YAG laser irradiation in dentine and compare this with its effect in enamel. The mechanism of crack propagation in dentine was emphasised and its clinical implications were discussed. Materials and methods Coronal sections of sound enamel and dentine were machined to 50-μm thickness using a FEI-Helios Plasma (FIB). The specimen was irradiated for 30 s with 2.94-μm Er:YAG laser radiation in a moist environment, using a sapphire dental probe tip, with the tip positioned 2 mm away from the sample surface. One of the sections was analysed as a control and not irradiated. Samples were analysed using the Zeiss Xradia 810 Ultra, which allows high spatial resolution, nanoscale 3D imaging using X-ray computed tomography (CT). Results Dentine: In the peritubular dentine, micro-cracks ran parallel to the tubules whereas in the inter-tubular region, the cracks ran orthogonal to the dentinal tubules. These cracks extended to a mean depth of approximately 10 μm below the surface. On the dentine surface, there was preferential ablation of the less mineralised intertubular dentine, and this resulted in an irregular topography associated with tubules. Enamel: The irradiated enamel surface showed a characteristic 'rough' morphology suggesting some preferential ablation along certain microstructure directions. There appears to be very little subsurface damage, with the prismatic structure remaining intact. Conclusions A possible mechanism is that laser radiation is transmitted down the dentinal tubules causing micro-cracks to form in the dentinal tubule walls that tend to be limited to this region. Clinical relevance Crack might be a source of fracture as it represents a weak point and subsequently might lead to a failure in restorative dentistry.

Applications of scanning electron microscopy and focused ion beam milling in dental research

“…Hard tissues have been extensively studied using micro-CT [10][11][12][13], though this technique is limited to micron resolution. Nanoscale resolution of dental structures has more recently been made possible with nano-CT; however, this technique requires specific instruments, a synchrotron X-ray source, or special sample preparation, which has limited its utility for studying intricate structures [14][15][16][17][18][19][20]. Atomic force microscopy is also an advanced tool for dental research as it can provide high-resolution images and reveal mechanical properties [21][22][23][24].…”

High-energy x-ray nanotomography introducing an apodization Fresnel zone plate objective lens

“…High-spatial-resolution x-ray computed tomography (CT) based on a full-field x-ray microscope, known as x-ray nanotomography (nano-computed tomography, nano-CT), is widely used for realizing nanometer-scale three-dimensional (3D) nondestructive observation of the inner structures of objects. Most variants, including those based on synchrotron-radiation (SR) sources and laboratory sources, are designed to be used at an x-ray energy range of less than 15 keV, [1][2][3][4][5][6][7][8][9][10][11][12][13] which is sufficient for many types of materials with sample dimensions less than several tens of micrometers [the typical field of view (FOV) for nano-CT systems]. However, for 3D imaging of high-Z materials, x rays must possess higher energy (several tens of keV).…”

Deep-learning-based image registration for nano-resolution tomographic reconstruction

“…Nano-resolution tomography and, in particular, nanoresolution spectro-tomography are regarded as a powerful modality of TXM with successful case studies spanning energy materials, environmental science, geoscience, etc. With the ongoing efforts in the developments of X-ray optics (Chang & Sakdinawat, 2014) and the next-generation X-ray facilities (Aljdaimi et al, 2018;Dong et al, 2019;Schneider, 1998;Zaman et al, 2019), further improvements in spatial, temporal resolution, and chemical sensitivity can be anticipated.…”