Microstructure and Properties of 8YSZ with High Component BAS

Abstract

The sintering temperature of 8YSZ (8mol% yttrium stabilized zirconia) is very high, usually above 1500°C. BAS (BaO-Al2O3-SiO2) microcrystalline glass can be used as sintering aids to reduce the sintering temperature of 8YSZ. In this research, large proportion (30-50wt%) BAS was added in 8YSZ to observe the influence of the sintering aids. The change rules of mechanical properties such as density test, bending strength and toughness in different material component and sintering process were researched. The results show that physical and mechanical performance improvement with the increase of sintering temperature and sintering time, density and bending strength decreases with the increase of BAS mass fraction. The optimal mechanical properties are obtained by sintering temperature 1300°C, sintering time 0.5h and 30wt% BAS.