Microtremor Survey Method: A New Approach for Geothermal Exploration

Abstract

Geothermal resources are a type of sustainable and green energy, which can play an important role in emission peaks and carbon neutrality. Determining the best development target area is key to resource development and geophysical methods are commonly used for this purpose. Owing to serious human and industrial interference, the microtremor survey method is often adopted for geothermal exploration in urban areas. It is a passive source method, which is non-invasive and environmentally friendly. In this method, the Rayleigh wave dispersion curve is extracted using spatial autocorrelation based on the vertical component signal at the observation station. A genetic algorithm is used to invert the dispersion curve of one survey point to obtain strata parameters such as layer thickness, S-wave velocity, and density. It provides critical parameters for the cap layer and reservoirs for geothermal exploration. For a chain microtremor measurement, a two-dimensional (2D) apparent S-wave velocity section can be generated. The apparent S-wave velocity is calculated from the phase velocity using the following empirical method: the 2D apparent S-wave velocity section helps to identify the buried channel for heat flow and track the irregular shapes of the reservoirs or cap layers. It has been verified that the microtremor survey method is reliable and accurate compared with borehole materials. As a newly developed non-invasive geophysical method, it can be widely used in geothermal exploration.

Methods for the Geophysical Exploration and Sustainable Utilisation of Coalbed Methane Resources in Abandoned Mines of Shanxi, China

“…Du et al [38] applied the elliptical polarization imaging method to unidirectional and three-component microseismic signals to extract high signal-to-noise Rayleigh surface waves. Tian et al [39] used microseismic exploration to search for geothermal resources in an environmentally friendly and reliable manner. Wang et al [40] used microseismic exploration during the construction of an underground tunnel to predict potential changes in the local geology.…”

Upper computer software design for fretting signal acquisition system based on Qt

“…However, the traditional electromagnetic and seismic exploration will be disturbed by the complex urban environment to a certain extent, so that is difficult to achieve satisfactory results. The micro-motion signal has the characteristics of easy acquisition and antiinterference 4 . Even in a complex urban environment, it can effectively collect the required data and achieve a advantageous detection effect.…”

Comprehensive Geophysical Measurement in Seismic Safety Evaluation: A Case Study of East Lake High-Tech Development Zone, China

“…In northeastern Hungary, 39 two-dimensional reflection seismic profiles are used to delineate and evaluate underground geothermal resources [12]. Microtremor survey [13][14][15][16][17] is also one of the hot spots of research in the field of engineering physical prospecting at present. Through a microtremor survey, Xu Peifen et al [18] analyzed the stratigraphic structure and buried fault characteristics, Zhang Wei et al [19] rapidly identified overburden thickness and karst development characteristics, and many other scholars have made great achievements in solving engineering geological problems [20].…”