Microwave Synthesize Karaya Gum-Cu, Ni Nanoparticles Based Bionanocomposite as an Adsorbent for Malachite Green Dye: Kinetics and Thermodynamics

Abstract

A novel approach was used to synthesize karaya gum-Cu, Ni nanoparticles based bionanocomposite by microwave irradiation method. Synthesized bionanocomposite was characterized by different techniques like Fourier transform infrared spectroscopy (FTIR), Field Emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), High Resolution Transmission Electron Microscopy (HR-TEM), and Energy Dispersive X-Ray Analysis (EDX). The optimized condition for Karaya Gum-Cu-Ni–Bionanocomposite synthesis was the amount of solvent 4 ml, pH 10, time 20 s, power 100 W, monomer, and cross-linker concentration 14.11 mol L-1 and 0.1135 mol L-1, respectively. The maximum % swelling was found to be 1,176%. Different reaction parameters were optimized to get the maximum adsorption of malachite green dye. The maximum dye adsorption was found to be 94.1%. Different models for kinetics and isotherms were applied to analyze the adsorption data. Malachite green sorption onto bionanocomposite is best defined by pseudo second order kinetics, signifying that the dye uptake by the nanocomposite was organized by chemisorption method involving sharing of electrons in-between the cationic part of the dye as well as the anionic part of the bionanocomposite. Correlation coefficient (R2) was close to unity (0.99569). The R2 values of nanocomposite best fit in the Freundlich adsorption isotherm. The study confirmed the synthesized bionanocomposite was an efficient adsorbent for the adsorption of the harmful malachite green dye.

Bentonite Impregnation Ammonium-Assisted as Eco-Friendly Dye Adsorbent: Analyses of Kinetics and Thermodynamics in Cationic Dye Adsorption

“…The Langmuir model assumed that the adsorption occurs in the formation of monolayer adsorbate in a specific area adsorbent. In contrast, the Freundlich model assumed that adsorption occurs via the adsorbate's multilayer formation to the adsorbent's surface [57]. Table 3 shows the isotherm analysis of this work.…”

Gum katira-silver nanoparticle-based bionanocomposite for the removal of methyl red dye

“…where, q e refers to the amount of dye adsorbed, Ce corresponds to the equilibrium concentration of MR in solution, k f refers to the Freundlich constant, and 1/n refers to the adsorption capacity. The values of k f and n can be determined from the intercept and slope (Wang et al, 2018;Saruchi et al, 2022). The correlation coefficient was best fitted in the Freundlich adsorption isotherm.…”

Recent advances in environmentally friendly structural colored fabrics

“…However, the pollution in the process of dyeing fabrics with dyes is inevitable, and appropriate methods need to be adopted for further treatment, such as precipitation, adsorption, ion exchanger, membrane filtration. [17][18][19][20] Compared with dyes, photonic crystals show excellent material diversity, chemical stability, and environmental friendliness, and they can further broaden the sources of fabric to be dyed. Moreover, utilizing photonic crystals to dye fabrics can endow them with not only iridescent or non-iridescent structural color, but also additional functions, such as responsiveness and hydrophobicity.…”