Modeling and Simulation of A Six Step Discontinuous Current Mode Inverter Fed Permanent Magnet Synchronous Motor Drive Using SIMULINK

Abstract

This manuscript describes modelling of a six step [5 -9]. Detailed SIMULINK model for PMSM drive fed by discontinuous current mode inverter fed PMSM drive using six step inverter with fixed switching angle is available in the SIMULINK. The dq-axis voltage-current and torque relation in literature reference [10]. SIMULINK models for PMSM drive terms of machine parameters are used to develop the SIMUlLINK fed by six step inverter with a PID controller is reported in the model. A six step 120 degree mode inverter model is newly literature, but lacks schematic details of PMSM and inverter developed using SIMULINK. Performance test and measurement were conducted on Lybotec six step discontinuous models [11]. current inverter fed PMSM drive at no load in the laboratory. These values are used in this open loop model. Simulation resultsThe object of this paper is to develop SIMULINK models for phase advance angle of i/6 and n/4 are given and compared for PMSM drives supplied by six step discontinuous current with experimental results. mode inverter with switching angle advancing facility and to study the performance by simulation and experiment.

Motor driving/braking control scheme with integration of multiple driving components

“…The former is traditional and simple to realize. It does not rely on complex calculation yet generates large starting torque [7–9]. FOC is able to result in fast response and less operational noise.…”