Models of diffusion of emergency emissions from railway tanks with petroleum products

Abstract

In the event of the destruction or explosion of tanks with oil products, basic schemes for the distribution of pollutants have been developed in the area of a technical stop of a train at a distance of up to 1000 meters in all directions, taking into account all structures located in the study area. On the basis of an analytical assessment of the consequences of an emergency, it was shown that in the event of the destruction or explosion of railway tanks with oil products, from 90 to 95 % of economic and public facilities will be located in the zone of exceeding the MPC by 2-300 times. The limits for exceeding the permissible concentrations of polluting components in the parking area and flushing of tanks intended for the transit of oil and oil products have been established. The greatest excess will be at a distance of 300 meters from the tank car parking, where, for all priority polluting components, it is possible to exceed the MPC by 300 times. For a distance from the source of emissions more than 1000 meters in each direction of light, the calculation of the maximum permissible concentration of polluting components was performed.

Monitoring Concrete Road Pavement Damages

“…One of these measures is the care of the laid concrete mix. At the same time, it is necessary to take into account the ambient temperature [20,21,22].…”

Control of Load-Bearing Structures of Technological Overpasses

“…2780 and No. 2781 are made in the form of steel trusses with a span of 12.0 m. The upper and lower chords, braces and struts of steel trusses are made of paired steel corners [30,31,32]. The connection of the truss elements is carried out by welding, gussets and gaskets.…”

Models of technogenic pollution by dust and gas components at protection facilities

“…Technological procedures for reducing the number of dust and gas structures are as follows: unassembled rock is undermined in the presence of a retaining partition with a thickness of at least 20-30 m; this technique has a large-scale application at mining and processing facilities, as the most versatile, economical, not requiring complex equipment techniques [16, 17 and 18]. It is desirable to emphasize that the volume fraction of dangerous toxic components is concentrated in the pieces of ore broken off from the layers [18,19]. To eliminate this specificity of the technological process of the mining industry, it is rational to use slaughters of microcrystalline components and hydrogel, which occur during the interaction of 6-8% solution Na2SiO3 and 3.5-4.5 % NH4NO3 in the mine workings.…”