Modern Smart Street Light Monitoring Systems

Abstract

This study highlights the importance of Modern Street light control systems over traditional ones, with LED lamps emerging as the most suitable choice due to their advantagessuch as reduced heat production, lower electricity consumption, and extended lifespan. The main goal is to enhance system efficiency by minimizing unnecessary electricity loss during daylight and when lighting is not required. Automating street lights using LDR and PIR sensorsin conjunction with Arduino Uno offers a costeffective and secure solution, eliminating the drawbacks of manual switching and simplifying cost reduction and maintenance. Additionally,applying a ZnO coating to the street light casings provides effective protection against dust and moisture, resulting in efficient lighting. The process involves sol-gel deposition of ZnO nanoparticles on silica glass substrates, followed by preannealing and repeated dip coating. Annealing at temperatures between 450°C and 600°C further improves the results. The uniformand defect-free coatings are confirmed by SEM images, while transmission spectra reveal over80% penetration of visible light (400 nm to 900 nm). Lower precursor concentrations lead to better penetration of light below 300 nm wavelength.

Advancements and Challenges in Electromobility: A Comprehensive Review

“…Electric vehicles contribute to a significant reduction in greenhouse gas emissions compared to internal combustion engine vehicles (ICVs) [1].…”

A Critical Review on Role of 3D-Printer in Cardiology

“…It offers high-quality pre-and postprocedural virtual management and medical education. Additionally, it teaches doctors how to properly handle and manage leads and catheters before doing surgeries (2) (73). Using echocardiographic data, 3D printed heart models can be created that are specific to the patient.…”

“…(26). Future 3D printed tissue models must be of the highest caliber in terms of both biological and technological factors if all the objectives are to be met (32) (72). In terms of proof-of-principle, 3D printing has the capacity to create intricate patterns from computer-aided files, making it feasible to create identical replicas of patient tissues.…”