Modification of oil palm empty fruit bunch fibers by nanoparticle impregnation and alkali treatment

“…The main peaks observed in the TGA were characterized by two-step degradations over the range of temperatures tested. An initial weight loss was observed between 50 °C and 150 °C for almost all of the samples, due to the loss of moisture content and low volatile compounds (Chowdhury et al 2013). The next sharp degradation began at elevated temperatures and corresponded to the degradation of hemicellulose, cellulose, lignin, etc.…”

Section: Thermal Propertiesmentioning

confidence: 97%

“…The next sharp degradation began at elevated temperatures and corresponded to the degradation of hemicellulose, cellulose, lignin, etc. (Chowdhury et al 2013). The derivative thermo-gravimetric (DTG) curves were generated from the differentiation of TGA curves (weight by percentage, wt.%), which provided information about the temperature at which the weight loss was most dramatic.…”

Section: Thermal Propertiesmentioning

confidence: 99%

Microscopic Structural Features and Properties of Single Fibers from Different Morphological Parts of the Windmill Palm

Chen¹,

Sun²,

Chen³

et al. 2017

BioResources

View full text Add to dashboard Cite

The chemical, morphological, physical, and thermal properties of raw materials and single fibers extracted from different morphological parts of windmill palm were examined and comprehensively characterized after an alkali treatment. Leaf sheathes (LS) with the highest cellulose content (52.26%) achieved the most efficient extraction of fibers. Single fibers extracted from the vascular bundles of the windmill palm raw material had a slender shape with a tapering and sealing terminus, with each single fiber possessing a lumen in its cross-section. These windmill palm fibers displayed similar chemical compositions, but they exhibited significant differences in morphological parameters. Leaf blade fibers (LBFs) had the longest length (1240 μm ± 470 μm) and highest aspect ratio (121.39), which presented excellent potential as a reinforced fiber. After the alkali treatment, almost all of the hemicelluloses and lignin were removed, which resulted in increased crystallinity of extracted fibers. Thermogravimetric analysis confirmed LS stability up to 319 °C, which was higher than that of other materials from windmill palm.

show abstract

“…From the FTIR spectrum, the degree of cationization (C d ) was calculated according to the following relation [9]:…”

Section: Fourier Transformed Infrared Spectroscopymentioning

confidence: 99%

“…The obtained FCuNPs were loaded in the EFB natural fibre. Before the loading of FCuNPs in EFB fibres, the surface of the fibres is tailored by the cationic agent CHPTAC since they have a natural tendency to exhibit negatively charged surface owing to the presence of large amount of hydroxyl groups [9]. Thereafter, different types of composite were developed and their properties were studied.…”

mentioning

confidence: 99%

Development of Cu Nanoparticle Loaded Oil Palm Fibre Reinforced Nanocomposite

Ridzuan¹,

Khan²,

Kabir³

et al. 2013

ANP

View full text Add to dashboard Cite

Functionalized copper nanoparticles (FCuNPs) have been synthesized by chemical reduction method and polyvinyl alcohol (PVA) performed as a stabilizer in that medium. Analysis observed that the average size of the synthesized FCuNPs was 3.5 nm. The obtained FCuNPs were loaded in the oil palm empty fruit bunch (EFB) natural fibre. Before the loading of FCuNPs in EFB fibres, the surface of the fibres is tailored by the cationic agent CHPTAC since they have a natural tendency to exhibit negatively charged surface owing to the presence of large amount of hydroxyl groups. Thereafter, different types of composite were developed and their properties were studied. The composites were developed by using the untreated empty fruit bunch (UEFB) fibres and FCuNPs loaded EFB (NP-CAEFB) fibres with commercially available unsaturated polyester resin (UPER). The synthesized composites were characterized through FTIR, FESEM, XRD, DSC, tensile strength tests, etc. The obtained biodegradation results indicated that significant weight loss was not observed for neat PER and PER/FNP-CAEFB nanocomposite, whereas, the UEFB/VUPER composite showed ca. 21.4% weight loss at 90 days, which was considered rationally due to the preferential degradation of the fibre.

show abstract

Modification of oil palm empty fruit bunch fibers by nanoparticle impregnation and alkali treatment

Cited by 76 publications

References 39 publications

Effect of Mercerization on the Properties of Pandanus Odorifer Lignocellulosic Fibre

Effect of Mercerization on the Properties of Pandanus Odorifer Lignocellulosic Fibre

Microscopic Structural Features and Properties of Single Fibers from Different Morphological Parts of the Windmill Palm

Development of Cu Nanoparticle Loaded Oil Palm Fibre Reinforced Nanocomposite

Contact Info

Product

Resources

About