Molecular Dynamics Simulation of High Temperature Mechanical Properties of Nano-Polycrystalline Beryllium Oxide and Relevant Experimental Verification

Abstract

This article investigated the deformation behavior of nano-polycrystalline beryllium oxide under tensile and compressive stress using the molecular dynamics simulation method. Both the tensile and compressive test results indicate that beryllium oxide breaks mainly along grain boundaries. At low temperature, there is little internal deformation of beryllium oxide grains. When the temperature is above 1473 K, the internal deformation of beryllium oxide grains also occurs, and the phenomenon becomes more obvious with the increase in temperature. This deformation within the grain should be plastic. The flexural strength fracture morphology of beryllium oxide also shows that the fracture mode of beryllium oxide is a brittle fracture at low temperature, while the slip bands appear at 1773 K. This indicates that beryllium oxide, as a ceramic material, can also undergo plastic deformation under high temperature and stress.

Analysis of the Effect of Temperature on the Ultimate Strength of Refractory Materials

“…The behavior of refractory materials under various cyclic loads can also be judged from the microstructure of refractories. In the works [21,22], the microstructure, characteristics, and properties of refractories (compressive strength, tensile strength, and crack resistance) were studied at various temperatures. The assessment of microstructural damage was carried out on refractory samples using a microscope METAM-32.…”