Morphology and photoelectrochemical behaviour of CdSe/ZnO composites obtained by the screen printing technique

Abstract

We report the morphology and photoelectrochemical (PEC) behaviour of CdSe/ZnO composite coatings prepared by the screen-printing and sintering technique. Precipitates of two different chemical baths were used for the screen-printing process. Atomic force microscopy images show that the topography of the composite coatings depends on the precipitate. Superior PEC performance and stability are obtained for the composite based on the precipitate of a dimethyl selenourea bath, which has a well formed polycrystalline surface with a narrow distribution of cluster sizes. The lower diffuse reflectance and smoother topography of these coatings, when compared to the composite based on the precipitate of a selenosulphate bath, can be correlated to larger values of photocurrent. Under short circuit conditions, photocurrent oscillations were observed in the stability curves of fresh specimens, in both composites. They are attributed to the complex solution chemistry of Zn compounds, formed during the sintering step by incomplete oxidation and thermal decomposition of the ZnCl 2 flux. The hexagonal character of CdSe, enhanced in the precipitate of the dimethyl selenourea bath, is expected to have an important role in determining the quality of the composite coating and its PEC performance.

Improvement of power conversion efficiency of P3HT:CdSe hybrid solar cells by enhanced interconnection of CdSe nanorods via decomposable selenourea

“…SeU was used as a Se source of metal chalcogenide. 22,23 First, SeU is added to P3HT:CdSe-py in solution for the ligand exchange. Then, P3HT:CdSe-SeU solution is spin-coated to prepare the thin lm where the interconnection of CdSe nanorods in the nanoscale range is obtained.…”

Studies on CdIn2O4 derived from CdIn2S4 prepared by flux method

“…Equipments required are simple and within the financial scope of most laboratories. Screen printing is a viable and economical method to produce thick films of various materials which has been used to produce varistors, actuators, solar cells etc (Rincon et al 1999).…”

Screen printed nanosized ZnO thick film

“…But for all practical applications, a good quality thick film pattern of nanosized ZnO particles is more desirable than colloidal samples. Screen printing is a viable and economical method to produce thick films of various materials which has been used to produce varistors, actuators, solar cells etc (Rincón et al 1999). The powder extracted is characterized and a thick film paste is prepared by adding suitable binder and solvent.…”