Multi-functional glass/carbon fibers hybrid inter/intra laminated composites

O’Donnell, Jacob; Chalivendra, Vijaya

doi:10.1016/j.jcomc.2021.100121

Cited by 12 publications

(6 citation statements)

References 25 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Sitohang et al proposed thermoplastic laminated composites that exhibited a shear force in sporadic areas because of the misaligned or twisted intralayer fibers, which eventually caused the failure of composites [ 7 , 8 ]. In addition, the properties and failure mode of the hot-pressing laminated composites were dependent on the expansion of intralayer fibers [ 9 ], the twisting of lamination planks [ 10 ], or the delamination of laminated composites [ 11 ]. In particular, delamination is one of the major factors that causes damage to composites.…”

Section: Introductionmentioning

confidence: 99%

Thermoplastic Laminated Composites Applied to Impact Resistant Protective Gear: Structural Design and Development

Lin

Lou

et al. 2023

Polymers

View full text Add to dashboard Cite

Laminated composites have been commonly applied to all fields. When made into laminated composites, Kevlar woven fabrics are able to provide the required functions. In this study, two types of TPU are incorporated to improve the intralayer features of Kevlar/TPU laminated composites. Hence, the Kevlar/TPU laminated composites consist of firmly bonded laminates while retaining flexibility of the fabrics. Being the interlayer of the laminated composites, the TPU layer provides adhesion while strengthening the tensile property, dynamic puncture resistance, and buffer strength of Kevlar/TPU laminated composites. The test results indicate that with a blending ratio of two types of TRU being 85/15 wt%, the Kevlar/TPU laminated composites exhibit a tensile strength of 18.08 MPa. When the stacking thickness is 1 mm, the tensile strength is improved to 357.73 N with the buffering strength reaching 4224.40 N. Notably, with a thickness being 1.2 mm, the laminated composites demonstrate a dynamic resistance being 672.15 N. In the meanwhile, functional Kevlar fabrics are allowed to keep the fiber morphology owing to the protection of TPU composite films. Considering the composition of protective gear, Kevlar/TPU laminated composites possess a powerful potential and are worthwhile exploring.

show abstract

Section: Introductionmentioning

confidence: 99%

Thermoplastic Laminated Composites Applied to Impact Resistant Protective Gear: Structural Design and Development

Lin

Lou

et al. 2023

Polymers

View full text Add to dashboard Cite

show abstract

“…Lately, researchers have studied employing different multiscale reinforcements along with various fabric architectures for self-sensing in Epoxy FRPCs. Using an electro-flocking process, O’Donnell and Chalivendra 11 reinforced micro carbon fibers perpendicular to the woven substrates at a density of 1000 fibers/mm 2 , prior to vacuum infusion. They experiment with both inter-ply and intra-ply carbon/glass hybridization.…”

Section: Introductionmentioning

confidence: 99%

Piezoresistive damage sensing and mechanical characteristics of carbon/glass hybrid thermoplastic composites

Shonar

Chalivendra

2023

Journal of Composite Materials

Self Cite

View full text Add to dashboard Cite

A comprehensive experimental investigation is performed to understand the damage sensing capabilities of thermoplastic intra-ply carbon/glass laminated composites embedded with Carbon Nanotubes (CNTs) under quasi-static interlaminar shear and mode-I fracture loading conditions. CNTs are dispersed in thermoplastic Elium® resin using a combination of ultrasonication and shear mixing processes. This resin mix is used in a vacuum infusion process to fabricate four different intra-ply laminated composites orientations; G-0-C-90 [Carbon fibers are in the longitudinal direction], G-90-C-0 [Glass fibers are in the longitudinal direction], G-45-C-45(R) [carbon and glass fibers are at +45°, and −45° from the longitudinal direction and form a repeating layup], and G-45-C-45(A) [carbon and glass fibers are at +45°, and −45°, but with alternating directions for each lamina in the layup]. Four-circumferential probes are utilized to obtain the piezo-resistance measurements associated with damage inside the composites under shear and mode-I loadings. In the shear experimentation, the G-45-C-45(A) orientation demonstrated the largest interlaminar shear strength, at 50% greater than the G-45-C-45(R) orientation. Both G-45-C-45(A) and G-45-C-45(R) had significantly larger shear strains compared to the G-90-C-0 and G-0-C-90 orientations. However, the best resolution in shear damage sensing was seen with the G-0-C-90 composites. In the mode-I fracture experiments, the greatest fracture initiation toughness is shown with the G-0-C-90 orientation, which is 80% greater than the G-90-C-0 orientation. Compared to all orientations, the G-0-C-90 orientation also provided the most sensitive electrical response.

show abstract

“…In terms of structural health monitoring, many scholars have proposed the concept of self-sensing composite materials [12,[22][23][24][25]. Self-sensing composite materials are one type of multifunctional composite materials.…”

Section: Introductionmentioning

confidence: 99%

Electrospun Polyvinylidene Fluoride Piezoelectric Fiber Glass/Carbon Hybrid Self-Sensing Composites for Structural Health Monitoring

Cheng

Huang

2023

Sensors

View full text Add to dashboard Cite

In this study, a polyvinylidene fluoride (PVDF)/graphene nanoplatelet (GNP) micro-nanocomposite membrane was fabricated through electrospinning technology and was employed in the fabrication of a fiber-reinforced polymer composite laminate. Some glass fibers were replaced with carbon fibers to serve as electrodes in the sensing layer, and the PVDF/GNP micro-nanocomposite membrane was embedded in the laminate to confer multifunctional piezoelectric self-sensing ability. The self-sensing composite laminate has both favorable mechanical properties and sensing ability. The effects of different concentrations of modified multiwalled carbon nanotubes (CNTs) and GNPs on the morphology of PVDF fibers and the β-phase content of the membrane were investigated. PVDF fibers containing 0.05% GNPs were the most stable and had the highest relative β-phase content; these fibers were embedded in glass fiber fabric to prepare the piezoelectric self-sensing composite laminate. To test the laminate’s practical application, four-point bending and low-velocity impact tests were performed. The results revealed that when damage occurred during bending, the piezoelectric response changed, confirming that the piezoelectric self-sensing composite laminate has preliminary sensing performance. The low-velocity impact experiment revealed the effect of impact energy on sensing performance.

show abstract

Multi-functional glass/carbon fibers hybrid inter/intra laminated composites

Cited by 12 publications

References 25 publications

Thermoplastic Laminated Composites Applied to Impact Resistant Protective Gear: Structural Design and Development

Thermoplastic Laminated Composites Applied to Impact Resistant Protective Gear: Structural Design and Development

Piezoresistive damage sensing and mechanical characteristics of carbon/glass hybrid thermoplastic composites

Electrospun Polyvinylidene Fluoride Piezoelectric Fiber Glass/Carbon Hybrid Self-Sensing Composites for Structural Health Monitoring

Contact Info

Product

Resources

About