Multi-Objective Optimization of Liquid Silica Array Lenses Based on Latin Hypercube Sampling and Constrained Generative Inverse Design Networks

Abstract

Injection molding process parameters have a great impact on plastic production quality, manufacturing cost, and molding efficiency. This study proposes to apply the method of Latin hypercube sampling, and to combine the response surface model and “Constraint Generation Inverse Design Network (CGIDN)” to achieve multi-objective optimization of the injection process, shorten the time to find the optimal process parameters, and improve the production efficiency of plastic parts. Taking the LSR lens array of automotive LED lights as the research object, the residual stress and volume shrinkage were taken as the optimization objectives, and the filling time, melt temperature, maturation time, and maturation pressure were taken as the influencing factors to obtain the optimization target values, and the response surface models between the volume shrinkage rate and the influencing factors were established. Based on the “Constraint-Generated Inverse Design Network”, the optimization was independently sought within the set parameters to obtain the optimal combination of process parameters to meet the injection molding quality of plastic parts. The results showed that the optimal residual stress value and volume shrinkage rate were 11.96 MPa and 4.88%, respectively, in the data set of 20 Latin test samples obtained based on Latin hypercube sampling, and the optimal residual stress value and volume shrinkage rate were 8.47 MPa and 2.83%, respectively, after optimization by the CGIDN method. The optimal process parameters obtained by CGIDN optimization were a melt temperature of 30 °C, filling time of 2.5 s, maturation pressure of 40 MPa, and maturation time of 15 s. The optimization results were obvious and showed the feasibility of the data-driven injection molding process optimization method based on the combination of Latin hypercube sampling and CGIDN.

An Investigation of the Acoustic Enclosure of an Air Conditioning Compressor Using Response Surface Analysis and Topological Rigidity Optimization

“…Te selected sample points should sufciently refect the characteristics of the entire experimental design space, making it a crucial aspect of constructing the response surface model. Commonly used methods for sample selection include central composite design (CCD) [31], Latin hypercube sampling design [32], orthogonal experimental design [33], and Box-Behnken experimental design [34]. Considering the complexity of the mapping relationship between design variables and output response values, the central composite design method is adopted in this paper to construct the sample space.…”

Machine Learning in Soft Matter: From Simulations to Experiments

“…The reinforcement learning framework was then trained to perform inverse design, that is, to obtain the DLCA model parameters for a desired fractal dimension and elastic modulus. Similarly, Chang et al [268] in their investigation of high-performance liquid silica array lenses, employed a Latin hypercube sampling approach to achieve accurate direct predictions. They then accomplished inverse design by employing a constraint generation inverse design network, ultimately succeeding in the inverse design of liquid silica array lenses with the optimal residual stress value and volume shrinkage rate.…”

Bayesian optimization genetic algorithm based on automated stereo warehouse space optimization

“…(2) Initialization of the population To generate the initial population, the Latin Hypercube Sampling (LHS) method was used [12].…”