Multistability of a long droplet in a capillary tube under transverse body force

Abstract

Bistable states for a sufficiently large amount of liquid can appear in an eccentric capillary due to the eccentricity effect under zero gravity (J. Fluid Mech, vol. 863, 2019, pp. 364–385). A transverse body force, which can lead to rich physical phenomena of a droplet, may lead to multistable states (bistability, tristability and the likes) of a sufficiently large amount of liquid in a capillary. We theoretically investigate this situation in a circular or annular capillary tube under a transverse body force. The results show that there can be tristable (bistable) states in an annular (circular) capillary tube: an occluding configuration and two (one) non-occluding configurations. In the annular tube, for one of the non-occluding configurations, the gas–liquid interface in the middle cross-section of the droplet meets both the inner and outer walls of the tube (bridging configuration); for the other non-occluding configuration, the gas–liquid interface in the middle cross-section of the droplet does not meet the inner wall (non-bridging configuration). The multistability is dependent on the Bond number, the contact angle and the cross-sectional shape. The multistability cannot occur for a zero or very large Bond number. A hydrophilic condition (the contact angle smaller than 90°) contributes to the non-occluding non-bridging configuration, while the hydrophobic condition (the contact angle larger than 90°) contributes to the non-occluding bridging configuration (only for the annular capillary). For the annular capillary with a not-so-large contact angle, increasing the inner-to-outer radius ratio can lead to a larger range of Bond numbers, in which the multistability occurs.