N-Doped Graphene (N-G)/MOF(ZIF-8)-Based/Derived Materials for Electrochemical Energy Applications: Synthesis, Characteristics, and Functionality

Abstract

In recent years, graphene-type materials originating from metal–organic frameworks (MOFs) or integrated with MOFs have exhibited notable performances across various applications. However, a comprehensive understanding of these complex materials and their functionalities remains obscure. While some studies have reviewed graphene/MOF composites from different perspectives, due to their structural–functional intricacies, it is crucial to conduct more in-depth reviews focusing on specific sets of graphene/MOF composites designed for particular applications. In this review, we thoroughly investigate the syntheses, characteristics, and performances of N-G/MOF(ZIF-8)-based/derived materials employed in electrochemical energy conversion and storage systems. Special attention is given to realizing their fundamental functionalities. The discussions are divided into three segments based on the application of N-G/ZIF-8-based/derived materials as electrode materials for batteries, electrodes for electrochemical capacitors, and electrocatalysts. As electrodes for batteries, N-G/MOF(ZIF-8) materials can mitigate issues like an electrode volume expansion for Li-ion batteries and the ‘shuttle effect’ for Li-S batteries. As electrodes for electrochemical capacitors, these materials can considerably improve the ion transfer rate and electronic conductivity, thereby enhancing the specific capacitance while maintaining the structural stability. Also, it was observed that these materials could occasionally outperform standard platinum-based catalysts for the electrochemical oxygen reduction reaction (ORR). The reported electrochemical performances and structural parameters of these materials were carefully tabulated in uniform units and scales. Through a critical analysis of the present synthesis trends, characteristics, and functionalities of these materials, specific aspects were identified that required further exploration to fully utilize their inherent capabilities.

Dynamic ant colony optimization algorithm for parameter estimation of PEM fuel cell

“…15 stack, the number of fuel cells denotes by n C , and F represents the faraday constant. Presently, three distinct categories of losses occur when the fuel cell is being used to provide electrical energy for any application [22].…”

Optimization of PEMFC pressure control using fractional PI/D controller with non-integer order: design and experimental evaluation

“…Moreover, a rise in stack temperature lowers total efficiency. Numerous recent studies have devised various novel approaches to address the issue [11][12][13].…”

ARGET-ATRP-Mediated Grafting of Bifunctional Polymers onto Silica Nanoparticles Fillers for Boosting the Performance of High-Capacity All-Solid-State Lithium–Sulfur Batteries with Polymer Solid Electrolytes

“…However, in conventional liquid-state LIB systems, the favorable solubility of lithium polysulfides (LiPSs) generated at the cathode during battery cycling leads to continuous loss of active materials in the cathode [ 8 , 9 , 10 , 11 , 12 ]. These soluble LiPSs (Li 2 S x , 4 < x < 8) migrate to the anode side with the electrolyte, a phenomenon known as the “shuttle effect”, where they react with the lithium metal, forming insoluble Li 2 S 2 and Li 2 S, which subsequently deposit on the lithium metal surface [ 13 , 14 , 15 ]. This seemingly promising cathode material simultaneously gives rise to the aforementioned issues on both the cathode and anode, resulting in rapid capacity decay of Li-S batteries.…”