Next-Generation Modeling, Analysis, and Testing of the Vibration of Mistuned Bladed Disks

Abstract

Public reporting burden for this collection of infonmation is estimated to average 1 hour per response, including the time for revievong instructions, searching eXisting data sources, gathering and maintaining the data needed, and completing and reviewing this collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, Including suggestions for reducing this burden to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for falling to comply with a collection of information id it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. REPORT DATE (DD-MM-YYYV)2 SPONSORING I MONITORING AGENCY NAME(S) AND ADDRESS(ES) 10. SPONSOR/MONITOR'S ACRONYM(S)Air Force DISTRIBUTION I AVAILABILITY STATEMENTApproved for public release; distribution is unlimited. AFRL-SR-AR-TR_080011 SUPPLEMENTARY NOTES ABSTRACTTurbomachinery rotors, or bladed disks, are known to suffer from severe vibration problems due to small, random deviations (mistuning) of the blade properties. Mistuning can lead to dramatic increases in the maximum blade stress and cause high cycle fatigue (HCF), which is a major cost, readiness, and safety concern for the U.S. Air Force. The primary objective of this research was to provide significantly improved understanding, modeling, and prediction of the vibration response of mistuned bladed disk systems by including the effects of important phenomena that had been largely neglected in previous mistuning models. The models developed in this research program were used to investigate the interaction of blade mistuning with aerodynamic coupling, stage-to-stage connections for multistage rotors, blade damage, and nonlinearities. In addition, key mistuning phenomena were examined through vibration testing of blisks (single-piece bladed disks). New methods were developed for identifying blade mistuning parameters from test data and for running experimental Monte Carlo assessments of the effects of mistuning on the system forced response. SUBJECT TERMS AbstractTurbomachinery rotors, or bladed disks, are known to suffer from severe vibration problems due to small, random deviations (mistuning) of the blade properties. Mistuning can lead to dramatic increases in the maximum blade stress and cause high cycle fatigue (HCF), which is a major cost, readiness, and safety concern for the U.S. Air Force. The primary objective of this research was to provide significantly improved understanding, modeling, and prediction of the vibration response of mistuned bladed disk systems by including the effects of important phenomena that had been largely neglected in previous mistuning models. The models developed in this research program were used to investigate the int...