Nonlinear Surface Conductivity Characteristics of Epoxy Resin-Based Micro-Nano Structured Composites

Abstract

Nonlinear composite materials serve to homogenize electric fields and can effectively improve the local concentration of the electric field in power systems. In order to study the nonlinear surface conductivity properties of micro-nano epoxy composites, two types of epoxy micro-nano composite specimens were prepared in the laboratory using the co-blending method. The surface conductivity of the composites was tested under different conditions using a high-voltage DC surface conductivity test system. The results show that the surface conductivity of micro-nano structured composites increases and then decreases with the rise of nanofiller doping concentration. The nonlinear coefficient was 1.781 at 4 wt% of doped nanostructured SiC, which was the most significant nonlinear coefficient compared to other doping contents. For the same doping concentration, the micro-nano structured composites doped with nanostructured SiC have more significant surface conductivity at the same test temperature with a nonlinear coefficient of 1.635. As the temperature increases, the surface conductivity of the micro-nano structured composite increases significantly, and the threshold field strength moves towards the high electric field. Along with the increase in temperature, the nonlinear coefficients of micro-nano composites after doping with nanostructured SiC showed a gradually decreasing trend. The temperature has little effect on the nonlinear coefficients of the micro-nano structured composites after doping with O-MMT.

Nonlinear Conductivity and Thermal Stability of Anti-Corona Epoxy Resin Nanocomposites

“…This choice of mass fraction (1 wt%) for the two nano-fillers aims to prevent agglomeration in the prepared composite materials. Furthermore, it ensured that the resulting composite materials exhibited good dielectric properties, as evidenced by our previously published article [33]. Mechanical stirring was performed on these two mixtures at room temperature for 2 h at a speed of 1500 r/min.…”