Novel approaches to improve the gas exchange process of downsized turbocharged spark-ignition engines: A review

Abstract

Engine downsizing, which is the use of a smaller engine that provides the power of a larger engine, is now considered a mega-trend for the internal combustion engine market. It is usually achieved using one or more boosting devices including a supercharger or a turbocharger. Although supercharging is beneficial for engine's transient response, turbocharging technology is more widely adopted considering its advantages in fuel efficiency. Compared to turbocharged compression ignition engines, turbocharged spark-ignition engines tend to be more challenging with respect to the gas exchange process mainly due to their higher pumping loss, the need for throttling and the fact that spark-ignition engines demand more controllability due to the mitigation of knock, particularly with regard to minimizing trapped residuals. These challenges encourage the entire gas exchange process of turbocharged spark-ignition engines to be regarded as a complete air management system instead of just looking at the boosting system in isolation. In addition, more research emphasis should be focused on novel approaches to improve the gas exchange process of downsized turbocharged spark-ignition engines because the refinement of the conventional technologies cannot provide continuous gains indefinitely and only innovative concept may improve the engine performance to meet the fuel efficiency target and the more stringent emission regulation in the future. This article will first briefly review knowledge of the current state of the art technologies that are in production as opposed to approaches that are currently only being investigated at a research level. Next, more novel methods of the gas exchange process are introduced to identify the improved synergies between the engine and the boosting machine. The major findings to improve the gas exchange process that emerge from this review comprise four aspects (depending on the location where the novel technologies are implemented) which are as follows: charge air pressurization/de-pressurization improvement, combustion efficiency enhancement within the chamber, valve event-associated development and exhaust system optimization. Although the interaction between these technologies on different aspects of the gas exchange process was found to be highly complex, the optimization or the combination of these technologies is anticipated to further improve a downsized turbocharged spark-ignition engine's performance.

Progress and recent trends in 48 V hybridisation and e-boosting technology on passenger vehicles – a review

“…Turbocharging and downsizing, which are often combined with direct injection (DI) have been proved to stand out as one of the most important strategies for achieving better fuel efficiency. 15 Figure 10 shows the CO 2 reduction potential for increasing the degree of engine downsizing, which indicates that there is still some potential for further downsizing to be attained over current levels. 16 Further downsizing an internal combustion engine using just a single-stage turbocharger, however, would not be considered unless the steady-state low-end torque and the transient performance could somehow be enhanced.…”

A Hybrid End-to-End Control Strategy Combining Dueling Deep Q-network and PID for Transient Boost Control of a Diesel Engine with Variable Geometry Turbocharger and Cooled EGR

“…Turbocharging and boosting are key technologies in the continued drive for improved internal combustion engine efficiency with reduced emissions [1]. For more than a decade, engine boosting has seen widespread adoption by passenger and heavy goods vehicle powertrains in order to increase the specific power and enable the downsizing megatrend [2]. However, many challenges still remain, as the regulation requirements become stricter, and the demand for low-carbon powertrains increases [3].…”

Impact of simple surge-enhancing inlet geometries on the acoustic behavior of a turbocompressor

“…Turbochargers are ever more common in all kinds of internal combustion engines, even those of reduced size and spark ignition combustion [1] that used to be naturally-aspirated. However, along with the advantage of increased boosting pressure, turbochargers bring about specific issues such as lag, stalling operation, deep surge and worse noise, vibration and harshness (NVH) behaviour [2].…”